Fleck Nitrate & Nitrite (Well) Filter

$1,795.00

Buy Now

View full details

If You See or Suspect Nitrate/Nitrite in Your Water

Government sampling by the U.S. Geological Survey took 166 nitrite measurements from 36 wells in Sussex County aquifers, ranging 9 to 89 feet deep, between 2014 and 2019. Results showed a median nitrite concentration of 0.0055 mg/L and a range from 0.001 to 0.03 mg/L. Nitrite was detected in only 18 results; 148 were below the reporting limit. No federal safety thresholds were exceeded in these samples.

The terms detected, median, and range describe concentrations found during sampling but do not indicate specific conditions at your tap. Detection only means the presence was measurable. Median expresses the midpoint of data, and range indicates lowest to highest amounts found. Your own well’s nitrite level may differ and needs lab testing to determine.

If You Choose to Treat Your Water Using the Fleck Nitrate & Nitrite (Well) Filter

After configuring this treatment system, you can expect reduced nitrite and nitrate levels at the tap. The technology targets these compounds specifically, using filtration designed for well water treatment. Treated water should show significantly lower nitrite and nitrate concentrations, aligning with typical safety expectations for these substances.

This helps improve water quality where elevated nitrate or nitrite is confirmed. However, it is not a substitute for confirming your water’s exact composition with a certified lab test before purchase.

If You Want to Narrow Down What’s Affecting Your Water Quality

• Start by visually inspecting water for color or unusual taste changes, which may suggest high dissolved solids rather than nitrate issues.
• Check plumbing and fixtures for corrosion or deposits, as these are unrelated to nitrate levels.
• Have a certified laboratory perform a detailed nitrate and nitrite analysis on a representative sample from your household water source.
• If nitrate exceeds levels typical for Sussex County aquifers, further targeted testing and monitoring are advisable.

If You Need to Assess Treatment System Capacity for Daily Household Water Use

Estimate the total daily water volume your household consumes. Common measures are gallons per day or per capita usage multiplied by household size. Treatment capacity of the Fleck System must align with this demand to ensure effective nitrate and nitrite reduction without frequent maintenance or downtime.

Confirm your estimated daily water use before acquiring the filtration system to ensure it fits your household’s needs confidently.

If You Notice Symptoms Potentially Linked to Nitrate or Nitrite in Water

While high nitrate or nitrite levels in water can cause health issues such as methemoglobinemia (blue baby syndrome) in infants, government sampling in Sussex County has not shown concentrations above federal thresholds. Symptoms like unusual taste, staining, or odor are unlikely to be caused by nitrate or nitrite here and suggest investigating other water quality factors.

Health-related symptoms should prompt consulting health professionals and testing water specifically for nitrate, nitrite, and other possible contaminants.

Final Step to Settle Your Nitrate Concern

Order a certified laboratory test specifically for nitrate and nitrite on a fresh sample from your household water source. A clear test result is the only way to determine accurately whether treatment is needed and which system will perform effectively. This evidence will guide your choice between technical approaches.

Where this information comes from

Source: USGS groundwater sampling. Sampled 2019-12-10. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.

On record: U.S. Geological Survey sampling of Nitrite in the aquifer (Sussex County): 166 results from 36 wells, median 0.0055 mg/L, range 0.001-0.03 mg/L; none above any federal threshold