Fleck Arsenic Filter

$1,099.00

Buy Now

View full details

Arsenic Levels in Public-Area Sampling Are Not a Direct Indicator of Private Well Conditions

At your kitchen faucet, you might notice changes in taste or see water discoloration that leads you to suspect arsenic or another contaminant. However, state and federal water systems monitor arsenic by sampling wells like those in Shelby County’s aquifer 112TILL, not individual residential wells. The government data provides a regional overview, revealing what the aquifer water generally contains as measured in wells about 60 feet deep across the area. It is important to understand these sampled values are not definitive for your household water, especially following any failure of current filtration equipment.

Certified Laboratory Tests Clarify Your Water’s Specific Arsenic Content

To know exactly what arsenic is in your well water, a test from a certified laboratory is necessary. Such a test measures arsenic concentration with precision and reports results in micrograms per liter. When reviewing the report, remember that the U.S. Geological Survey found a median arsenic concentration of 10.1 micrograms per liter in Shelby County’s 112TILL aquifer, with all samples between 8.9 and 11.8 micrograms per liter. While these values were detected, none were above federal limits, indicating that these regional results do not automatically translate to unsafe levels in your home’s water.

Start Diagnosis with Simple Checks Before Laboratory Testing

Before sending samples for professional analysis, begin with basic water quality observations and equipment status. Since your existing treatment has failed, check for signs such as sudden changes in taste, staining on plumbing fixtures, or water clarity shifts. These can suggest a need for testing arsenic or other parameters. Subsequently, collect a water sample according to lab instructions to obtain a reliable arsenic concentration specific to your well, confirming or ruling out this contaminant as a concern.

Industrial and Commercial Water Use Requires Broader Water Quality Questions

Unlike household users, commercial or industrial operators consider arsenic levels alongside additional factors such as process water standards, discharge regulations, and multi-constituent treatment requirements. While residential concerns focus largely on drinking water safety and aesthetics, operators must integrate arsenic testing into a wider water management strategy, including compliance with environmental limits and operational efficiency.

Household Symptoms That May Suggest Arsenic Are Often Non-Specific

In your home, symptoms that might point to an arsenic issue include a metallic or unusual taste and persistent staining on faucets and fixtures. However, these signs can also arise from other water quality problems. Conversely, health symptoms sometimes associated with arsenic exposure cannot be diagnosed through water observation alone and require medical consultation coupled with confirmed water analysis.

In summary, regional arsenic data from Shelby County’s 112TILL aquifer gives a useful baseline but is not a substitute for testing your individual water source. After confirming arsenic presence through certified testing, households experiencing equipment failure can consider targeted water treatment options. The Fleck Arsenic Filter system ships ready to configure and offers a documented approach to reduce arsenic levels when needed, supporting safer, clearer water at home.

Where this information comes from

Source: USGS groundwater sampling. Sampled 2025-08-29. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.

On record: U.S. Geological Survey sampling of Arsenic in the 112TILL aquifer (Shelby County): 3 results from 1 wells, median 10.1 ug/L, range 8.9-11.8 ug/L; none above any federal threshold