Fleck Orange Iron & Rust Stains Filter

$1,157.00

Buy Now

View full details

The groundwater in Mason County, Illinois, mostly comes from aquifers sampled by the U.S. Geological Survey. This aquifer water reaches household taps through wells that draw water from depths typically between 10 and 22 feet. Understanding what is in this water helps homeowners decide the right treatment approach for issues like iron and rust.

How will water treated with the Fleck Orange Iron & Rust Stains Filter differ at the tap?

After water passes through the Fleck Orange Iron & Rust Stains Filter, it typically shows reduced iron content, which helps minimize rust stains and discoloration on fixtures, laundry, and plumbing surfaces. Homeowners can expect clearer water with fewer visible signs of iron presence. This filter system is designed specifically to target iron and rust-related issues common in the area’s groundwater. The improvement is mainly aesthetic and can also help preserve plumbing and appliances.

How does aquifer and well depth affect expected iron levels in well water?

The U.S. Geological Survey sampled water from two wells in the Mason County aquifer, finding depths between 10 and 22 feet. Iron concentrations varied in these samples, with detections in 13 of 20 readings. Because these depths represent relatively shallow wells, iron levels may vary more compared to deeper wells. Homeowners with wells drawing from different depths or other zones may experience different iron concentrations. To know a specific well’s iron content, individual water testing is necessary.

How does the Fleck System remove or neutralize iron and rust?

The Fleck Orange Iron & Rust Stains Filter uses a filtration technology that efficiently captures iron particles and prevents them from causing stains or affecting water clarity. The process treats iron in its common forms found in groundwater, reducing both dissolved and particulate iron. This helps prevent rust formation inside plumbing and reduces the reddish or brownish color often seen in water with iron. The technology is designed to handle the typical iron levels observed in Mason County’s groundwater samples.

What happens if iron and rust remain untreated over several years in household plumbing?

If iron and rust are left untreated in household water, homeowners may notice staining on sinks, tubs, and clothing. Over time, these deposits can build up in pipes and fixtures, potentially reducing water flow and increasing maintenance needs. While not a health hazard, persistent iron and rust presence can affect water’s appearance and taste. Addressing these issues can improve household water quality and protect plumbing integrity.

What do 'detected,' 'median,' and 'range' mean in the iron sampling results for Mason County aquifer?

In the government sampling data for Mason County aquifer, 'detected' means the testing instruments measured iron in the water samples; it does not by itself indicate a problem or legal violation. The 'median' is the middle value of the 20 samples and was 1580 micrograms per liter (ug/L), indicating a typical concentration level in the area. The 'range' shows the lowest measured iron at 8.7 ug/L and the highest at 2130 ug/L. These values represent variability across sampled wells but do not translate directly into a well owner’s specific situation.

This data set represents iron sampling from two wells in the Mason County aquifer area, collected over multiple dates from October 2022 through July 2025. For detailed water quality information, visit the U.S. Geological Survey’s official groundwater monitoring site.

Where this information comes from

Source: USGS groundwater sampling. Sampled 2025-07-29. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.

On record: U.S. Geological Survey sampling of Iron in the aquifer (Mason County): 20 results from 2 wells, median 1580.0 ug/L, range 8.7-2130.0 ug/L; none above any federal threshold