What does a certified laboratory test for pH report and how should I interpret it?
A certified laboratory test for pH measures the acidity or alkalinity of your water on a scale from 0 to 14 standard units, where values below 7 indicate acidity and above 7 indicate alkalinity. In Burlington County's aquifer 125HORR, U.S. Geological Survey sampling from three wells recorded pH values ranging from 6.9 to 7.3, with a median of 6.9 standard units. These values fall within the U.S. EPA's secondary standard range of 6.5 to 8.5, which is set for aesthetic concerns and corrosivity potential rather than health. A test result below 6.5 would signal acidic water that may lead to material corrosion, but none of the sampled wells were below this threshold. Your own water's pH requires direct testing as these area values cannot determine the exact condition of your household water.
What happens if acidic water remains untreated for years?
Prolonged exposure to acidic water—water with a pH below the EPA secondary standard range—can gradually affect plumbing materials by increasing corrosion rates. This may result in the leaching of metals from pipes, premature aging of fixtures, and increased maintenance needs. However, water sampled in Burlington County's aquifer 125HORR during 2015 showed pH levels not low enough to indicate significant corrosivity risks. Untreated acidic water can also affect water taste and potentially cause staining on household surfaces over extended timeframes. These effects depend on your particular water chemistry and pipe materials, which is why testing is essential to understand your situation.
How often does the Fleck Acidic / Low-pH Water Filter require maintenance?
The Fleck Acidic / Low-pH Water Filter is designed to mitigate acidity by adjusting water pH to within acceptable aesthetic ranges. Maintenance intervals for this system are straightforward and should be planned in accordance with your water usage and filter media lifespan. The system ships ready to configure and typically requires routine checks and media replacement on a schedule consistent with the manufacturer's guidance. This ensures continued effective pH balancing without complicated upkeep.
Does household size or property type affect treatment needs?
Treatment capacity and frequency for acidic water adjustment can vary based on household size, water demand, and property usage patterns. Larger homes with higher daily water consumption may need a system with greater capacity or more frequent media regeneration to maintain effective pH levels. Seasonal homes or second properties with intermittent use might have different considerations, such as system idle times or maintenance schedules adapted to periods of non-use. Understanding your household’s daily water demand helps optimize treatment system selection and care.
How do seasonal or multi-year variations show in Burlington County’s water pH record?
The USGS sampling in aquifer 125HORR for Burlington County took place over several months from April to August 2015, and all pH values remained between 6.9 and 7.3 standard units during this timeframe. This indicates stability in pH across spring and summer months at sampled depths of approximately 13 feet. Although this limited sampling does not capture all seasonal changes, it suggests that pH levels in this aquifer area do not fluctuate dramatically. However, individual wells can vary due to local conditions and depth, so ongoing testing can provide more detailed insight over time.
How to determine if a treatment system matches your household’s daily water needs?
Assessing treatment capacity means comparing your household's average and peak daily water use with the system's specifications for flow rate and media volume. The Fleck Acidic / Low-pH Water Filter is calibrated to handle typical residential water volumes, but larger households or properties with elevated water use might require verification that the system meets demand without compromising pH adjustment efficacy. Consulting water use data for your household together with the product specifications ensures you select a system aligned with your consumption patterns.
In summary, the U.S. Geological Survey's sampling from Burlington County's aquifer 125HORR reports pH values ranging from 6.9 to 7.3 based on three well samples taken in 2015. These findings place the aquifer's water within the EPA secondary standard range for pH, which addresses aesthetic and corrosivity considerations rather than health concerns. The Fleck Acidic / Low-pH Water Filter provides a documented approach to managing acidic water where testing indicates pH levels below desirable aesthetic thresholds. For detailed information from the source, refer to the U.S. Geological Survey data on groundwater monitoring for Burlington County, NJ.
Where this information comes from
Source: USGS groundwater sampling. Sampled 2015-08-06. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.
On record: U.S. Geological Survey sampling of pH in the 125HORR aquifer (Burlington County): 3 results from 1 wells, median 6.9 standard units, range 6.9-7.3 standard units; EPA secondary standard for pH is 6.5-8.5 (aesthetic/corrosivity, not health-based); 0 of 3 sampled results fell below 6.5
- ✓ 90-Day Money-BackNo restocking fees — return within 90 days.
- ✓ Manufacturer WarrantyGenuine Fleck · Pentair · VIQUA equipment.
- ✓ Free Expert SizingTalk to a specialist and buy the right system the first time.