Deskripsi
If your home or building can’t go without soft water at any time, especially during the softener’s regeneration cycle, the WSP Twin-Tank Water Softener - Fiberglass offers a reliable solution. This twin-tank setup keeps treated water flowing continuously, even while one tank is recharging.
The problem you’re facing
When you have hard water, you notice it right away. There’s often a rough feeling on skin after showering. Your faucets and fixtures may show orange or white rings from mineral deposits. Soap doesn’t lather well, and your laundry might come out feeling stiff or looking dull. If your water softener goes offline during regeneration, you’re left with hard water at the tap until it finishes—meaning your water problems return for a while each cycle.
Why it happens
Hard water contains minerals like calcium and magnesium that build up over time on your pipes and appliances. A single-tank softener cleans this water by swapping those minerals for sodium or potassium, but it needs to pause service during regeneration to flush out the accumulated minerals. That’s when untreated hard water flows through your home, causing the issues you see and feel.
What it costs you to leave it
Letting hard water run through your plumbing wears down your water heater and appliances faster because mineral deposits act like insulation and make heating inefficient. You’ll use more soap and detergent, and spend extra time scrubbing bathroom and kitchen surfaces to remove scale and stains. Over time, these problems become more stubborn, making cleaning harder and shortening the lifespan of your equipment.
How this system fixes it
The WSP Twin-Tank system uses two tanks working in turns. While one tank is busy cleaning the hard water (through a process called ion exchange, where minerals are swapped out), the other tank stays online, delivering soft water nonstop. This back-and-forth means you don’t have to deal with hard water during regeneration because there’s always a tank ready to treat your water.
What this system can handle
Designed for homes or buildings where hard water treatment can’t stop, this twin-tank setup handles a high volume of water without breaking stride. The two 30-inch fiberglass tanks hold large beds of softening material, which means longer intervals between regeneration cycles and the ability to keep up with substantial daily water use. The fiberglass tanks resist corrosion and stand up well to humid environments inside mechanical rooms. This system can also be expanded into a quad-tank arrangement for even heavier demand.
What you actually get
The system comes with two 30-inch fiberglass tanks covered by a lifetime warranty on the tanks themselves. A bypass valve is included, letting you isolate the system easily for maintenance without cutting off your water supply. You’ll also receive 10 feet of discharge hose for the drain line, ready to connect for flushing the mineral build-up during regeneration. The control valves and electronics are covered by the manufacturer’s standard warranties.
Is this the right size for you
This twin-tank softener is ideal if you need a steady supply of soft water at all times and have a household or facility with moderate to heavy water use. If your water demand is lighter or you don’t mind short breaks in softened water, a single-tank unit might suffice. For very large commercial setups, you might consider a quadplex system instead.
Living with it
Maintenance mostly involves periodic replenishment of salt and occasional inspection of the system by your plumber. The bypass valve means servicing the unit won’t interrupt your water flow. The system’s durable fiberglass tanks and quality components help keep upkeep straightforward. Expect to regenerate less often than with smaller units, saving you salt and time.
What it won’t do
This softener won’t reduce chlorine, remove sediment, or filter out bacteria and other contaminants. If your water has those issues, you’ll need additional treatment systems designed for filtration or disinfection.
Why buy it from us
Water Softener Plus offers this robust twin-tank system with serviceable parts and a lifetime warranty on the tanks themselves. We ship directly from Tampa, Florida, with free U.S. shipping included in the price. Our team provides real sizing help based on your water use and hardness levels. We don’t do in-home installation, but your local licensed plumber can install and maintain this system without problem. Plus, you have a 90-day money-back guarantee if you’re not satisfied.
Included with this system
- Lifetime warranty on the tank. The control valve and electronics carry the manufacturer's own warranty.
- Bypass valve included, so the system can be isolated for service while water keeps running to the house.
- 10 feet of discharge hose for the drain line.
Specifications
| Type | Twin-Tank Water Softener |
|---|---|
| Included | Lifetime tank warranty · Bypass valve included · 10 ft discharge hose |
| WSP SKU | WSP-TT-SKID30FGTW |
| Shipping | Free U.S. shipping, included in the price |
| Ships from | Tampa, Florida |
| Returns | 90-day money-back guarantee |
What this system handles
- Scale on fixtures and glassware
- Soap that won't lather
- Stiff laundry and towels
- Scale inside the water heater
The next step
Order your WSP Twin-Tank Water Softener - Fiberglass today and start enjoying continuous soft water without interruption during regeneration.
Overview
- 🇺🇸 U.S.-based support and expert assistance
- 🔧 Built with trusted, industry-standard components
- 🚚 Ships nationwide - freight-safe packaging
- 🏠 Ideal for residential and light-commercial systems
Specs (Typical)
| Max Operating Pressure | 125 psi |
|---|---|
| Max Water Temp | 100 °F |
| Electrical | 120 V AC |
| Flow Range | 5-45 GPM (model dependent) |
Related: Control Valves . Parts . Get sizing help