WSP Softener Control Valve

The WSP Softener Control Valve is the key component that manages your water softener or filter’s backwash and regeneration cycle. This durable control head ensures your system runs smoothly and efficiently, helping maintain the quality of your softened water.

The Problem

If your water softener or filter isn’t running properly, you might notice your water feels hard again, or the system seems to cycle too often or not often enough. Maybe you’re dealing with inconsistent water softness, or the softener just won’t complete its cleaning and recharging steps correctly. This usually means the part controlling those cycles is worn or failing.

Why It’s Happening

Your water softener or filter depends on a control valve — sometimes called a control head — to manage the timing and flow during backwash and regeneration. These cycles flush out minerals or contaminants trapped in the resin or filter media and recharge it for continued use. When the valve’s seals wear down, or the internal mechanism sticks, the system can’t run these steps right, leading to poor water quality and inefficient operation. Checking if your system cycles oddly or leaks near the valve is a good first test that points to this issue.

What It’s Costing You to Leave It

A failing control valve means your softener or filter isn't cleaning itself properly. That lets scale or particles build up faster inside your tank and pipes. Over time, this can shorten the life of your water heater and appliances, increase your detergent use because water feels harsher, and leave stains or film that take more scrubbing to remove. You might waste water and salt by running regeneration cycles at the wrong times too. It doesn’t usually cause sudden breakdowns but quietly reduces your system’s effectiveness and drives up effort and expense.

How This System Fixes It

The WSP Softener Control Valve takes charge of your system’s regeneration and backwash cycles by directing water flow where it’s needed. It automatically switches between cleaning the resin or filter media and sending softened water to your home. The valve’s design uses precise timing and sealed pathways to control these steps without leaks or misfires. Its composite material resists corrosion and wear, so the mechanism keeps working smoothly through repeated cycles.

What This System Can Handle

This control valve is built for softeners and filters that require a 1-1/2 inch threaded connection. It handles the flow and pressure of residential or light commercial water systems reliably. It works across a wide range of water conditions and system sizes where this standard valve fits. Compared to smaller units, it supports higher flow rates and longer intervals between regeneration, making it well suited for homes or facilities with steady water use and typical hardness levels. While it does not include a bypass valve or hoses, it’s designed to fit into your existing setup with the right plumbing.

What You Actually Get

You receive a robust NWS 1-1/2" TC composite softener control valve. Its body is made from corrosion-resistant composite materials, ensuring durability. The valve features precise internal seals and timing controls to manage softener or filter cycles accurately. The threaded connection makes installation straightforward for any plumber familiar with standard water treatment equipment. The exact configuration and any additional fittings depend on your system’s needs and are confirmed during sizing.

Is This the Right Size for You?

This valve fits water softeners or filters that use a 1-1/2 inch threaded connection and require a durable control head for managing regeneration. If your system uses a different connection size or a simpler control setup, you’ll need a different valve. For very large commercial systems or unusual flow demands, a heavier-duty model might be more appropriate. Our team can help you determine if this valve matches your system’s specifications.

Living With It

Once installed, this control valve requires minimal maintenance. Periodic inspection during your usual softener service checks is recommended to spot any wear or leaks. The composite materials resist corrosion and keep seals tight for many years if your water conditions are typical. Any repair or replacement parts remain available, reducing downtime and avoiding sealed units that must be discarded.

What It Won’t Do

This control valve does not soften water or filter it by itself. It only manages the flow and timing of backwash and regeneration in an existing softener or filter system. If your water problem involves contaminants like sediment, chlorine, or bacteria, you’ll need an appropriate filter or treatment system alongside this valve. Also, it doesn’t include plumbing parts like bypass valves or hoses, which your installer will provide.

Why Buy It From Us

Water Softener Plus supplies control valves built to last with serviceable components, not disposable units. We stock parts and support for years after purchase. Our equipment ships from Tampa with free U.S. delivery included in the price. We offer a 90-day money-back guarantee and provide expert sizing help every time, based on your water problem and ZIP code. Our team knows water treatment inside out and will confirm the exact configuration your system needs.

Specifications

The Next Step

Contact the Water Softener Plus team to request your free quote and sizing. Provide your water problem details and ZIP code, and we’ll help make sure this control valve is the right fit before sending pricing and configuration information.