WSP 12500 GPD Reverse Osmosis System - Mmbrn Cntrl, 4x40"

This high-capacity reverse osmosis system is designed to reduce dissolved solids from drinking or process water, improving taste and lowering total dissolved solids (TDS). It produces about 12,500 gallons of purified water daily, making it suitable for large-scale needs where consistent water quality matters.

The problem you’re dealing with

If your drinking water tastes off, maybe a bit salty or metallic, or you notice mineral buildup around faucets and appliances, dissolved solids could be the cause. These are tiny particles—minerals like calcium, magnesium, and other compounds—that water picks up on its way to your home or facility. They don’t just affect taste; they can leave a film on glassware and cause your coffee or tea to taste flat or unusual. If your process water has inconsistent quality, that can disrupt operations or product quality.

Why it’s happening

Dissolved solids get into water from natural sources underground or from treatment chemicals used by water utilities. The only sure way to confirm their presence and level is a water analysis that measures total dissolved solids (TDS), expressed in parts per million (ppm). High TDS readings point to the need for treatment beyond common filters or softeners, because these solids won’t settle out or be caught by simple cartridge filters.

What it’s costing you to leave it untreated

Leaving dissolved solids in your water means you’ll keep dealing with off-tastes and mineral deposits that can stain fixtures and glassware. Over time, these solids can shorten the lifespan of your water heater and appliances by causing scale buildup inside them. In commercial or process settings, inconsistent water quality can interfere with product consistency and make equipment work harder, leading to increased maintenance and downtime.

How this system fixes it

This reverse osmosis system reduces dissolved solids by forcing water through specially designed membranes with tiny pores that block these particles. The process, known as reverse osmosis, separates impurities from the water, leaving cleaner, better-tasting water behind. The system’s controller manages this process automatically, keeping everything running smoothly and protecting the membranes from damage.

What this system can handle

Built for high-volume demands, this system produces about 12,500 gallons of purified water each day, making it suitable for facilities needing large amounts of low-TDS water. It uses four 4-inch by 40-inch membranes, each designed to handle significant water flow while keeping dissolved solids at bay. The system runs on 220 volts and is mounted on a sturdy floor stand for stable installation. Its controller oversees production, flushing, and shutdown to maintain consistent water quality and extend membrane life. This setup works well for food and beverage production, car washes, greenhouses, and other industrial or commercial uses where steady water quality is essential.

What you actually get

The system includes four 4x40-inch reverse osmosis membranes arranged to produce high volumes of purified water. It features an NRO ROC2 controller that automates operation tasks like flushing and shutdown to protect the membranes and keep output steady. The entire setup runs on standard 220-volt power and comes mounted on a floor-standing frame for easy placement. Exact component details and configuration are finalized once your water and needs are assessed.

Is this the right size for you

This system fits well if you need around 12,500 gallons of purified water every day, typically in a commercial or industrial setting. If your needs are significantly lower, a smaller system might serve you better and use less energy. Conversely, if you require even larger volumes or specialized treatment, you may need to consult for a custom solution. This isn’t intended for typical household use but for facilities where water quality and volume are both critical.

Living with it

Because this system uses membranes and automated controls, it requires regular maintenance to keep running efficiently. Pretreatment of the water is essential to protect membranes from damage and fouling. You’ll need to monitor the system and schedule membrane cleaning or replacement based on water quality and usage. While the controller automates much of the operation, routine checks are necessary, typically handled by your local plumber or water treatment professional.

What it won’t do

This system focuses on reducing dissolved solids and improving taste and water quality at scale. It does not remove bacteria, viruses, or chemical contaminants that require additional treatment steps. If your water has microbiological concerns or specific chemical pollutants, you’ll need other solutions designed for those issues.

Why buy it from us

We provide systems built with serviceable components, not sealed units you discard when they fail. Replacement parts remain available years down the line. We ship directly from Tampa, Florida, with U.S. shipping included in the price. Our team offers expert sizing and configuration help to match the system to your water and needs. We stand behind our products with a 90-day money-back guarantee, giving you confidence in your purchase.

Specifications

What this system handles

• Dissolved solids (TDS)
• Off-tasting drinking water
• Consistent process water

The next step

Contact the Water Softener Plus team for a free quote and sizing assistance. We’ll ask about your water problem and ZIP code to recommend the right configuration and provide pricing details tailored to your situation.