विवरण
This 1" Schedule 40 PVC pipe from Wolff Bros. Supply is a versatile mainstay for water-treatment and general plumbing runs, offering corrosion-free conveyance at a popular line size. Its slip outer diameter fits the complete range of standard 1" Schedule 40 slip fittings, making system building straightforward with the usual couplings, elbows, tees, and adapters.
A balanced, popular line size
The 1" size strikes a useful balance, carrying more flow than 3/4" while remaining easy to handle and fit, which makes it a frequent choice for softener and filter feed lines, distribution branches, and equipment connections. PVC's smooth interior bore supports good flow and resists the mineral buildup and rust that degrade metal pipe over time. The material also stands up well to chlorinated and treated water without breaking down or contributing corrosion to the line, so the bore stays clear and the flow stays consistent for the long haul.
- Size: 1" nominal diameter
- Material: Schedule 40 PVC
- Fitting type: pipe (sold by the foot)
- Works with standard 1" slip fittings
- Resists corrosion, rust, and internal scaling
- Approximate weight: 0.31 lb per foot
For dependable, pressure-rated joints, cut the pipe square, deburr the ends, and clean the surfaces before applying PVC primer and solvent cement to both the pipe and the fitting. Seat the pipe fully with a slight twist to distribute the cement and hold while the bond sets. Verify that Schedule 40 PVC suits your operating pressure and temperature before putting the line into service. Supplied by Wolff Bros. Supply, this 1" Schedule 40 pipe is an economical, long-lasting building block for residential and light-commercial water-treatment plumbing, ready to connect the fittings and equipment throughout your system.
PVC pipe should be stored out of prolonged direct sunlight, since extended UV exposure can gradually affect the surface of the material over long periods. For most indoor water-treatment installations this is a non-issue, but in any partially exposed run it is worth keeping in mind. Inside a typical mechanical room or utility space, this pipe will serve quietly and reliably for years, carrying treated or raw water between your equipment without rust, scale, or corrosion.
Overview
- ? U.S.-based support and expert assistance
- ?? Built with trusted Pentair & Fleck components
- ?? Ships nationwide - freight-safe packaging
- ?? Ideal for residential and light-commercial systems
Specs (Typical)
| Max Operating Pressure | 125 psi |
|---|---|
| Max Water Temp | 100 ?F |
| Electrical | 120 V AC |
| Flow Range | 5-45 GPM (model dependent) |
Related: Control Valves . Parts . Get sizing help

