Drain Male Elbow 3/8" x 1/2"

When a drain line needs to turn a corner, this Bee Valve drain male elbow handles the job cleanly. It combines a 3/8-inch male iron pipe thread (MIPT) with a 1/2-inch barb in a 90-degree elbow, letting installers route softener and filter drain tubing around tight spaces without forcing the hose into a sharp, flow-restricting bend. It is a small fitting that makes a real difference in keeping drain plumbing neat.

Why an Elbow Helps

Drain tubing that kinks restricts flow and stresses the hose at the bend, which over time can lead to leaks or sluggish drainage during backwash. A 90-degree elbow lets the line change direction smoothly, preserving full flow. The barbed leg grips 1/2-inch flexible tubing firmly, while the male-threaded leg seals into 3/8-inch female drain ports on control valves and treatment housings. Nylon construction resists the corrosion and scale that constant drain-water exposure inflicts on metal fittings, ensuring a long service life.

• 90-degree elbow with 3/8-inch MIPT to 1/2-inch barb
• Durable nylon body resists corrosion and scale
• Redirects drain tubing cleanly around obstructions
• Barb secures 1/2-inch flexible drain hose
• Fits standard softener and filter drain ports
• Keeps drain runs neat in cramped utility spaces

An elbow fitting is invaluable wherever a straight adapter would force an awkward hose bend, such as when a control valve sits close to a wall or the drain must turn immediately toward a standpipe. This Bee Valve part keeps drain runs tidy and free-flowing in water softener and filtration installations, and its low cost makes it easy to keep a few extras on hand for both new builds and repairs. Combined with the matching straight adapters and tees in the line, it lets installers route a clean, efficient drain path in almost any layout. For multi-unit installations and custom layouts, this all-barb tee is the flexible building block that lets a single drain run branch or merge exactly where you need it. Inexpensive and corrosion-proof, it belongs in every installer's kit of softener and filter drain fittings. Because every port shares the same 1/2-inch barb, it integrates seamlessly into a run built entirely from standard flexible tubing, giving installers true freedom to route drains wherever the layout demands.