How Treated Water Changes at the Tap with the Autotrol System
Once water from a Bossier Parish well is processed by the Autotrol Well Rust + Hardness System, the content of iron and hardness minerals diminishes to levels that commonly reduce staining, rust-colored sediments, and scale buildup. The water typically feels softer, and surfaces exposed to it show fewer deposits. The distinctive red or brownish tint linked to rust particles is greatly reduced. This treatment improves water clarity and reduces nuisance effects related to rust and mineral hardness, though it does not chemically alter water taste or pH beyond these improvements.
Differentiating Well Rust and Hardness from Other Common Confusions
Well rust and hardness are often mistaken for sediment problems or microbial growth. Sediment problems usually involve visible particles suspended in water and are unrelated to dissolved iron or hardness minerals. Microbial issues generate odors or slime and may discolor water but have different causes and treatments. Rust and hardness relate to iron and hardness minerals dissolved in water, manifesting primarily as stains, scale, or a metallic tint rather than particulate cloudiness or biological growth.
Effects of Untreated Well Rust and Hardness Over Time
Leaving well rust and hardness unaddressed can cause gradual staining on plumbing fixtures, laundry, and kitchenware. Over years, scale deposits build inside pipes and appliances that heat water, potentially leading to reduced efficiency or increased maintenance. While not a health hazard, these aesthetic and mechanical effects can result in additional household labor and potential premature appliance wear.
How the Autotrol System Removes Rust and Hardness Constituents
The Autotrol Well Rust + Hardness System employs a filtration and ion-exchange process that effectively reduces dissolved iron and hardness minerals in water. By passing water through a resin bed, the system traps iron particles and exchanges hardness ions for sodium or potassium ions, depending on configuration. The process is documented to handle up to 32,000 grains of hardness capacity, making it suitable for typical residential household demands in Bossier Parish aquifer 124SPRT.
Judging Treatment Capacity Against Household Daily Demand
Choosing the correct size for a well rust and hardness system depends on household water usage and hardness levels. The Autotrol System’s 32,000 grain capacity means it can treat a significant volume of hard water before regeneration is required. Estimating daily water consumption and correlating it with known hardness ranges is essential. Although government data reports iron concentrations in the Bossier Parish aquifer between 4.7 and 1,720 micrograms per liter, individual well testing is necessary to determine the exact water chemistry for sizing.
Seasonal and Multi-Year Variation in Regional Water Quality Data
The U.S. Geological Survey documented iron concentrations in four wells, sampled between 2010 and 2014 in Bossier Parish aquifer 124SPRT. Results ranged from 4.7 to 1,720 micrograms per liter with a median of 1,375 micrograms per liter. These data reflect typical variations over multiple years and depths from 107 to 360 feet. Consistent detection across all samples indicates iron presence throughout the aquifer but does not specify the individual well condition or exact concentration. Seasonal or annual changes can affect hardness and iron levels, so periodic testing is advisable.
In summary, sizing a treatment system for well rust and hardness in Bossier Parish requires understanding how treated water quality improves at the tap, distinguishing these problems from sediment or microbial issues, and recognizing the impacts of untreated water on household infrastructure. The Autotrol Well Rust + Hardness System, with its 32,000 grain capacity, offers a documented approach to reducing these constituents, though precise household sizing depends on specific water tests and demand estimates.
Where this information comes from
Source: USGS groundwater sampling. Sampled 2014-11-04. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.
On record: U.S. Geological Survey sampling of Iron in the 124SPRT aquifer (Bossier Parish): 10 results from 4 wells, median 1375.0 ug/L, range 4.7-1720.0 ug/L; none above any federal threshold
- ✓ 90-Day Money-BackNo restocking fees — return within 90 days.
- ✓ Manufacturer WarrantyGenuine Fleck · Pentair · VIQUA equipment.
- ✓ Free Expert SizingTalk to a specialist and buy the right system the first time.