Government sampling in Plymouth County's aquifer 112SRFD shows alpha particle activity detected in all tested wells but none exceeding federal thresholds. The median alpha particle reading from 15 wells was 0.95 pCi/L, with a range from -0.8 to 12.1 pCi/L, measured between June and September 2019 at well depths from 8 to 166 feet. This data reflects conditions in the area aquifer, not individual well water.
What You Should Write Down Before Seeking Treatment Advice
Before deciding on treatment, note your well's depth and source type—important because sample depth affects uranium and radium levels. Record any recent water tests showing alpha particle levels or related findings, as these establish your specific water condition. Also, document your household water system's history, including when your previous equipment failed, and any changes in water characteristics.
What Happens When Uranium-Radium Is Left Untreated for Years
Untreated uranium and radium in water may contribute to elevated alpha particle activity, but government data for Plymouth County's aquifer indicates all sampled wells were below federal limits. Over time, without proper treatment, water may retain these constituents at natural levels found in the area. Not treating, however, does not mean a health violation or immediate hazard; it means the water matches regional baseline data.
Household Symptoms That Do and Do Not Indicate Uranium-Radium
Symptoms such as unusual taste, staining, or odors typically do not point to uranium or radium contamination. Alpha particle activity is not associated with sensory changes in water. Problems like discoloration, metallic taste, or buildup more often relate to other constituents. Therefore, symptoms alone cannot confirm uranium-radium presence or levels in your household water.
How Treated Water Differs at the Tap Once the Pentair Uranium & Radium System Is in Place
Once water passes through the Pentair Uranium & Radium System, it undergoes reduction of alpha particle activity by removing uranium and radium ions. The system has a grain capacity of 32,000, designed for extended operation before media replacement is needed. Treated water at the tap shows lower alpha particle counts reflective of the system's filtration capability, providing peace of mind aligned with regional safety standards.
How Sample Depth, Well Depth, or Source Type Affect What to Expect
Variations in well depth influence uranium and radium levels in Plymouth County aquifer 112SRFD. Shallow wells near 8 feet may have different alpha particle activity than those reaching 166 feet deep. The government sampling covers this depth range, confirming detections without exceedances. Source types such as drilled bedrock wells versus shallower aquifers can alter constituent profiles, making specific testing essential to understand your water.
In summary, government records for Plymouth County’s aquifer indicate uranium-radium levels detected but below federal thresholds. To address your specific water, testing your own well's alpha particle activity is necessary. The Pentair Uranium & Radium System ships ready to configure and is documented for this problem with a 32,000 grain capacity, offering effective reduction once properly engaged.
Where this information comes from
Source: USGS groundwater sampling. Sampled 2019-09-05. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.
On record: U.S. Geological Survey sampling of Alpha particle in the 112SRFD aquifer (Plymouth County): 30 results from 15 wells, median 0.95 pCi/L, range -0.8-12.1 pCi/L; none above any federal threshold
- ✓ 90-Day Money-BackNo restocking fees — return within 90 days.
- ✓ Manufacturer WarrantyGenuine Fleck · Pentair · VIQUA equipment.
- ✓ Free Expert SizingTalk to a specialist and buy the right system the first time.

