Fleck Total Well Chlorination System

Buy Now

View full details

Introduction to Rockingham County Bedrock Aquifer Water Supply

In Rockingham County, New Hampshire, many households draw water from wells tapping the bedrock aquifer. Groundwater moves through fractures and porous spaces in bedrock, ultimately flowing into these wells and reaching your taps. Understanding the qualities of this aquifer helps homeowners identify potential water issues and consider proper treatment.

1. Interpreting Chloride Levels: A Local Data Example

The U.S. Geological Survey sampled six bedrock wells in Rockingham County between late 2011 and mid-2019, collecting 96 results for chloride concentration. The median chloride level was 27.1 milligrams per liter (mg/L), with observed values ranging from 14.1 to 559.0 mg/L. This means half the samples measured below 27.1 mg/L and half above, while the lowest and highest readings show the spread of measurements in the area’s bedrock aquifer wells.

2. Comparing Rockingham County to Neighboring Areas Without Overinterpreting Data

While neighboring counties may have their own chloride sampling results, it is important to resist assuming your own well’s conditions mirror those reported by government surveys. These records represent typical conditions over multiple wells and years, providing a regional picture but not a direct reading of any one household’s water. Comparing data can help identify regional trends but does not substitute for specific local testing.

3. Noting Seasonal and Multi-Year Variation in Sampling Records

The chloride data spans nearly eight years and multiple seasons, showing that concentrations can fluctuate over time. Changes in rainfall, groundwater recharge, and other factors can cause variations in chloride levels in local wells across seasons and years. Recognizing the presence of this natural variability helps set realistic expectations about the stability of water quality over time.

4. Understanding the Terms 'Detected,' 'Median,' and 'Range' in Government Sampling

• Detected: means the chloride was measured by instruments in every tested well sample; no sample was below reporting limits.
• Median: the middle value when all 96 results are ordered from lowest to highest, providing a typical central reading.
• Range: the difference between the lowest (14.1 mg/L) and highest (559.0 mg/L) recorded chlorine levels, demonstrating variability across locations and time.

5. How Water Differs at the Tap Once Treated by the Fleck Total Well Chlorination System

With the Fleck Total Well Chlorination System, water treatment addresses issues commonly associated with water drawn from bedrock wells, such as disinfecting and removing certain undesirable compounds. This system, which ships ready to configure, uses a capacity of 32,000 grains to provide continuous treatment. Treated water typically shows improved clarity and reduced bacterial presence compared to untreated water, enhancing safety and comfort for household use.

6. Maintenance Rhythm of the Fleck Total Well Chlorination System in Plain Terms

The Fleck System requires routine tasks such as replenishing chlorination agents and periodic system checks to maintain effective operation. Maintenance intervals vary but are designed to fit into household schedules without intensive effort. Proper upkeep ensures ongoing water quality improvements and reliable operation over time.

In summary, this page has guided you in interpreting Rockingham County’s bedrock aquifer chloride data with care, avoiding assumptions about your own water. It also explained the role of the Fleck Total Well Chlorination System in enhancing well water quality safely and consistently.

Where this information comes from

Source: USGS groundwater sampling. Sampled 2019-08-21. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.

On record: U.S. Geological Survey sampling of Chloride in the BEDROCK aquifer (Rockingham County): 96 results from 6 wells, median 27.1 mg/L, range 14.1-559.0 mg/L; 1 above an AESTHETIC secondary standard only (secondary standard 250.0 mg/L (aesthetic)) - not a health finding