Pentair Sensitive Skin & Eczema System

Buy Now

View full details

Residents facing sensitive skin issues often seek clarity on whether their home's water contributes to irritation. In Eddy County, New Mexico, aquifer water quality data provides helpful but limited insight. Government sampling offers median and range values for hardness-related minerals but cannot specify conditions at your specific well or tap. Understanding what these figures represent—and what they do not—is essential for making informed decisions on household water treatment sizing.

Sample Size and Well Representation: Interpreting Regional Data

The water quality figures for Eddy County's aquifer derive from three samples taken between November 2024 and June 2025, all from a single well roughly 120 feet deep. While this provides a snapshot of aquifer conditions, it is a small sample size and represents only one location within the area. As aquifer wells may vary by depth, geography, and usage, these data points alone cannot define water quality for every home.

Understanding 'Detected,' 'Median,' and 'Range' in Water Sampling

In the government report, constituents such as calcium and magnesium—the minerals that primarily contribute to water hardness—were registered in all samples. The median concentration was 446.0 mg/L, with a range from 432.0 to 453.0 mg/L. 'Detected' means these minerals were measured, not that their levels exceed any safety or aesthetic limits. No results surpassed federal standards, so the water does not pose documented health risks based on this data.

Distinguishing Sensitive Skin from Other Water-Related Issues

Sensitive skin reactions linked to water are often confused with problems caused by contaminants or irritants not measured here. Hardness minerals like calcium and magnesium can affect skin feel but are not safety hazards. It is important to differentiate these from conditions caused by factors such as chlorides or chlorine, which are not addressed in this aquifer sampling. Proper water testing tailored to your household is necessary to isolate causes.

Applied Example: Interpreting Median and Range for Your Home

Assuming your home's water aligns with the reported median hardness level of around 446 mg/L, you have moderately high mineral content. The range suggests some variation, but all samples clustered closely around this figure. To address skin sensitivity attributable to mineral presence, the Pentair Sensitive Skin & Eczema System provides 32,000-grain capacity water treatment. Sizing this system requires understanding your household water volume and usage since the regional data alone cannot define your precise needs.

Seasonal or Multi-Year Variation Reflected in Sampling Dates and Ranges

The samples spanned late fall into early summer, capturing some seasonal variation in the aquifer's mineral levels. The narrow range between 432.0 and 453.0 mg/L indicates relatively stable hardness during this period at the sampled well. However, longer-term fluctuations and influences from other local wells remain unknown, underscoring the value of testing your own water periodically.

In summary, Eddy County aquifer data offers a measured view of regional mineral concentrations relevant to sensitive skin concerns but cannot substitute for specific household testing. Using this information alongside personal water use helps determine the correct capacity for the Pentair Sensitive Skin & Eczema System, ensuring tailored water treatment that addresses your family's needs effectively.

Where this information comes from

Source: USGS groundwater sampling. Sampled 2025-06-30. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.

On record: U.S. Geological Survey sampling of Hardness, Ca, Mg in the aquifer (Eddy County): 3 results from 1 wells, median 446.0 mg/L, range 432.0-453.0 mg/L; none above any federal threshold