If you notice mild skin irritation after water contact in your home
Government sampling in the CT area, specifically from wells drawing on the N100GLCIAL aquifer, showed that hardness-related minerals calcium and magnesium measured between 14.0 to 17.8 mg/L in three samples from two wells. This range is well below any federal thresholds designed to protect health. Thus, these detections do not indicate a health risk or legal exceedance. However, water mineral content even within these levels can still affect skin, especially for individuals with sensitive skin.
If you want to understand how many samples back up this CT water data
Only three data points from two wells collected between September 2010 and June 2011 form the basis of this area's reported range. These wells were shallow, 3 to 7 feet deep, which may not represent deeper residential wells. The limited number of samples means that while this provides a regional snapshot, it does not characterize all local water variations. Testing your household water directly remains necessary to precisely assess your situation.
If you consider how treated water changes at your tap using the Fleck Sensitive Skin & Eczema System
The Fleck Sensitive Skin & Eczema System, with a 32,000 grain capacity, conditions water by reducing minerals that can exacerbate skin sensitivity. Unlike untreated water drawn from the local aquifer, water treated by this system is modified to be gentler on sensitive skin. This can help soothe irritation linked to mineral content without compromising essential water use. The system ships ready to configure for your home setup.
If you want to compare CT’s water data with a neighboring county without assuming the same conditions
Water quality varies naturally by location due to geology and aquifer characteristics. A neighboring county may have higher or lower mineral concentrations, reflecting different environmental and geological settings. For this reason, CT's figures from the N100GLCIAL aquifer should not be assumed to apply beyond its boundaries. Each area's data is a separate factual snapshot, not a direct prediction for another place.
If you seek clarity on the role of aesthetic secondary standards versus health-based limits for these minerals
Calcium and magnesium are monitored as part of hardness, with secondary standards set primarily for taste, staining, and scaling concerns. These are not health-based limits. Consequently, having mineral levels in the sampled range does not imply health effects, only potential aesthetic or comfort considerations. Sensitive skin reactions may relate to these presence levels without indicating unsafe water.
If you are curious about seasonal or multi-year changes documented in this aquifer’s water quality
The sampling dates span from fall 2010 through mid-2011 and show a narrow range of mineral concentrations. This suggests relatively stable conditions during the sample period. Longer-term or seasonal fluctuations could occur but are not captured in this limited dataset. Regular testing of your household water is recommended to track any changes that might influence skin sensitivity.
Summary: This page guided you through interpreting CT’s groundwater mineral data relevant to sensitive skin. While three area samples show mineral levels well below health thresholds, these do not guarantee your household water’s character or skin effects. Testing your own home water and considering water treated by the Fleck Sensitive Skin & Eczema System offers a practical approach to managing sensitive skin concerns related to mineral content.
Where this information comes from
Source: USGS groundwater sampling. Sampled 2011-06-29. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.
On record: U.S. Geological Survey sampling of Hardness, Ca, Mg in the N100GLCIAL aquifer (FIPS 180): 3 results from 2 wells, median 16.6 mg/L, range 14.0-17.8 mg/L; none above any federal threshold
- ✓ 90-Day Money-BackNo restocking fees — return within 90 days.
- ✓ Manufacturer WarrantyGenuine Fleck · Pentair · VIQUA equipment.
- ✓ Free Expert SizingTalk to a specialist and buy the right system the first time.

