Government groundwater sampling in Wyoming County, New York, specifically from aquifer 341CAND, detected radon-222 in three samples collected from two wells between July 2015 and August 2020. The median radon concentration recorded was 2140.0 pCi/L, with a range between 310.0 and 2160.0 pCi/L. These wells were all between 100 and 130 feet deep. No sample exceeded any federal threshold.
How the Documented Treatment Technology Removes or Neutralizes Radon
The Pentair Radon in Water Filter addresses radon in water by reducing its concentration through a filtration process designed specifically for radon removal. This system uses treatment media and water flow dynamics optimized to reduce radon levels from the source water, improving water quality before household use. It ships ready to configure for straightforward setup by the user. While it does not eliminate radon instantly, it is a documented method to lower radon in residential water effectively.
The Role of Plumbing Material and Age, Separate from the Source Water
Radon presence in water primarily originates from the source aquifer and is less affected by household plumbing materials or their age. However, plumbing can influence the release of radon gas inside the home once water is used, since radon gas can transfer from water to indoor air during common activities like showering. Plumbing materials themselves do not create radon but can impact how radon gas disperses in the home environment.
How Many Samples and Wells Stand Behind the Figures, and What a Small Sample Means
The radon data for Wyoming County aquifer 341CAND is based on three samples collected from two separate wells over a five-year period. While this sampling provides useful insight into typical radon occurrence in this area, the limited number of wells and samples means the data is not a comprehensive survey of all wells or conditions. Individual well radon levels can vary based on depth, geology, and other local factors, so this regional data should be considered a general reference rather than a prediction for any specific household.
What Changes for a Large Household, a Second Home, or a Seasonal Property
Larger households with higher water consumption may draw more water daily, which could affect how treatment equipment like the Pentair system performs, particularly in flow rate and media life. Seasonal or second homes might experience variations in water use that impact radon exposure differently, potentially requiring adjustments in treatment frequency or capacity. The documented system adapts to common household water demands but assessing individual household water usage is important to maintain effective radon reduction.
What a Certified Laboratory Test for This Constituent Reports and How to Read It
A certified laboratory test for radon in water will provide a concentration report in picocuries per liter (pCi/L). This report specifies the radon level measured in a specific water sample taken from the household source. Unlike the regional government data, which summarizes multiple wells, a laboratory test reflects the radon concentration in the tested water at a certain time. Understanding the report includes noting the sample date, detection limits, and units. This concrete test is essential to determine the radon level in your own water supply.
How Sample Depth, Well Depth or Source Type Changes What a Reader Should Expect
Radon levels can vary with well depth and source type because radon naturally emanates from underground rock formations. The Wyoming County samples came from wells 100 to 130 feet deep, which reflects typical local conditions. Shallower or deeper wells, or different aquifers, may have different radon concentrations. Surface water sources generally have much lower radon levels since radon gas dissipates quickly in open water. Understanding your well's depth and source type helps set expectations but requires specific testing to confirm radon levels.
In summary, the radon data for Wyoming County aquifer 341CAND is based on a small number of sampled wells between 100 and 130 feet deep, showing detections within a known range but no exceedances of federal thresholds. For household radon concerns, testing your own water is the only way to establish your home's radon level. The Pentair Radon in Water Filter provides a documented water treatment option that ships ready to configure for reducing radon concentrations effectively. For more details, the government water data source is available at the U.S. Geological Survey groundwater monitoring site.
Where this information comes from
Source: USGS groundwater sampling. Sampled 2020-08-31. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.
On record: U.S. Geological Survey sampling of Radon-222 in the 341CAND aquifer (Wyoming County): 3 results from 2 wells, median 2140.0 pCi/L, range 310.0-2160.0 pCi/L; none above any federal threshold
- ✓ 90-Day Money-BackNo restocking fees — return within 90 days.
- ✓ Manufacturer WarrantyGenuine Fleck · Pentair · VIQUA equipment.
- ✓ Free Expert SizingTalk to a specialist and buy the right system the first time.