Pentair Radon in Water Filter

Buy Now

View full details

What a Certified Laboratory Test for Radon in Water Reports and How to Read It

When you send a water sample for radon analysis to a certified laboratory, the result indicates the concentration of radon-222 in picocuries per liter (pCi/L). This value quantifies the radioactivity due to radon gas dissolved in the water at the time of collection. Importantly, these results reflect only the sample provided, representing your particular well or tap. Government data for the Richmond County aquifer 125DBLNL, however, are based on different wells sampled from 120 feet deep, so those figures show regional tendencies but do not directly indicate your home's water quality.

A Worked Example: Reading the Richmond County Radon Record Median and Range

The U.S. Geological Survey measured radon levels in one well within Richmond County's 125DBLNL aquifer, collecting three samples between June 2021 and July 2025. The radon-222 concentrations detected ranged from 162.0 to 184.0 pCi/L, with a median of 170.0 pCi/L. These figures represent the middle and spread of radon concentrations in that location over time but should not be interpreted as your own well's radon level. Your water could vary due to geology, well depth, and other factors. If you have concerns about radon in your home's water, a certified laboratory test of your specific supply is necessary.

Why Aesthetic Secondary Standards Differ from Health-Based Limits for Radon in Water

Radon levels are regulated with respect to health risk, but aesthetic secondary standards often address taste, odor, or staining rather than direct health effects. For radon in water, no aesthetic standard applies. The federal guidance or recommended maximum contaminant level for radon is typically set as a health-based reference point to guide treatment decisions. In Richmond County's samples, no radon concentration exceeded federal thresholds. Detected radon does not imply the water is unsafe without additional context, and concentrations below a set limit are not considered problematic by regulatory agencies.

How to Judge Treatment Capacity Against Your Household's Daily Water Demand

When selecting radon treatment equipment, consider your household's average and peak water use to ensure the system can handle flow rates without compromising radon reduction. The Pentair Radon in Water Filter ships ready to configure for residential water supplies, designed to reduce radon levels effectively at typical household flow rates. Understanding your daily water consumption, including multiple simultaneous fixtures, helps you choose a system that maintains performance and water availability under normal use conditions.

How Many Samples and Wells Stand Behind the Figures, and What a Small Sample Means

The Richmond County data rests on three samples from a single well in the local aquifer, which gives a limited but helpful perspective on radon presence in that area. A small sample size means variability may exist at other sites or depths within the county, highlighting that area-wide data serve as a general indicator, not a definitive measurement for your property. Site-specific testing remains essential to establish your home's water radon level reliably.

How the Documented Treatment Technology Removes or Neutralizes Radon

The Pentair Radon in Water Filter employs specialized media that adsorbs and removes radon gas dissolved in water before it reaches household fixtures. This filtration process reduces radon levels effectively and can be integrated with other water treatment equipment. The system is designed for ease of use and does not require on-site professional labor to configure, providing a practical solution after radon presence is confirmed by testing.

In summary, Richmond County's area aquifer radon measurements provide valuable regional insight but do not replace testing your home's water to determine actual radon levels. Understanding test results, treatment capacity needs, and applying a proven filtration system like the Pentair Radon in Water Filter can help manage radon effectively in residential water supplies.

Where this information comes from

Source: USGS groundwater sampling. Sampled 2025-07-07. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.

On record: U.S. Geological Survey sampling of Radon-222 in the 125DBLNL aquifer (Richmond County): 3 results from 1 wells, median 170.0 pCi/L, range 162.0-184.0 pCi/L; none above any federal threshold