What the Measured Radon Range Means and What It Does Not
Residents in Glynn County often ask, "What do radon measurements in local groundwater mean for my household water?" Government sampling by the U.S. Geological Survey in 2019 measured radon-222 concentrations in three separate wells from aquifer 122BRCKU, ranging from 128.0 to 330.0 pCi/L, with a median of 167.0 pCi/L. These measurements reflect conditions in that area but do not specify radon levels in any individual household's well or tap water.
None of the sampled results exceeded federal thresholds for radon in drinking water. This means the data do not indicate a violation or unsafe condition in the sampled wells. However, since radon levels can vary by well depth, geology, and other factors, homeowners cannot assume their water matches these figures without testing their own supply.
How the Autotrol System Addresses Radon in Water
The Autotrol Radon in Water Filter uses a technology designed to reduce radon concentrations by removing radon gas from the water before it reaches household taps. It treats water directly, not just in theory but documented for effectiveness with this constituent. This system ships ready to configure for household use to provide an option for homeowners concerned about radon present in their water.
Maintenance Rhythm of the Autotrol Radon in Water Filter
Maintaining the Autotrol System is straightforward and involves regular checks to ensure the filter media remains effective at radon reduction. Its rhythm of maintenance depends on water usage and radon load but typically involves periodic media replacement and system checks to maintain consistent water quality. This maintenance ensures long-term performance without complex procedures.
How Radon Enters Groundwater in Glynn County
In Glynn County, radon-222 typically originates from natural radioactive decay of uranium in underground rock formations. Radon gas can dissolve into groundwater as it flows through these rocks and sediments. Well depth plays a role; samples were taken from wells 220 to 240 feet deep, reflecting radon presence at those depths. Radon may then enter the household water supply when groundwater is drawn for use.
How Treated Water Differs at the Tap After Using the Autotrol System
Once water passes through the Autotrol Radon in Water Filter, the radon concentration is substantially lowered, reducing potential exposure through inhalation or ingestion. Treated water typically shows a decrease in radon gas content, resulting in safer and more comfortable water for household tasks. The system is designed to maintain water quality without altering other water characteristics.
To determine your household’s specific radon level, order a certified laboratory test of your well or tap water for radon-222. A test result showing radon below recommended action levels would provide clarity about your water quality. This single measurement is the most direct way to assess whether additional treatment is needed for your home.
Where this information comes from
Source: USGS groundwater sampling. Sampled 2019-09-25. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.
On record: U.S. Geological Survey sampling of Radon-222 in the 122BRCKU aquifer (Glynn County): 3 results from 3 wells, median 167.0 pCi/L, range 128.0-330.0 pCi/L; none above any federal threshold
- ✓ 90-Day Money-BackNo restocking fees — return within 90 days.
- ✓ Manufacturer WarrantyGenuine Fleck · Pentair · VIQUA equipment.
- ✓ Free Expert SizingTalk to a specialist and buy the right system the first time.