If you notice your current radon reduction system struggling to keep pace, it helps to understand the context of radon levels in Camden County's groundwater.
How does the depth of groundwater wells influence radon levels in this area?
The U.S. Geological Survey sampled three wells in Camden County’s aquifer 211MRPAU, each between 276 and 473 feet deep. Radon-222 was detected consistently, with levels ranging from 62.0 to 134.0 picocuries per liter (pCi/L), and a median value of 89.0 pCi/L. These measurements describe the general radon content in deep groundwater at those depths. Because radon concentrations can vary with well depth and local geology, shallower or differently constructed wells might show different results. Therefore, these figures inform expectations but are not a substitute for testing your home’s water source directly.
What additional concerns do commercial or industrial water users have about radon compared to households?
While household users focus primarily on water used for drinking, cooking, and bathing, commercial and industrial operations may require radon considerations for process water, employee safety, and environmental discharge. These settings might also seek more frequent and varied testing at multiple points in their systems, along with compliance checks against regulations that extend beyond residential needs. For homeowners, understanding general area data is a first step that can help tailor appropriate treatment solutions.
What information does a certified laboratory report provide from a radon-in-water test?
A certified lab analyzing your water will measure radon-222 concentration in pCi/L, the standard unit for this radioactive gas. Their report will state the detected concentration, the method used, the sample depth if known, and sometimes the uncertainty or detection limits of their instruments. Unlike regional samples, this test is specific to your water source. Reports do not designate a detection as a violation on their own; federal guidelines provide context but each result must be interpreted carefully.
How can the median and range of the Camden County radon samples help a homeowner understand what to expect?
The median result of 89.0 pCi/L represents the middle value of the three sampled wells, giving a typical concentration found in deep aquifer water there. The range from 62.0 to 134.0 pCi/L shows that values fluctuate, reflecting natural variations in radon occurrence. For a household, this means your own water may be somewhat lower or higher than these numbers, but likely within this band if drawing from similar depths. Knowing this helps set realistic expectations and informs whether enhanced treatment capacity may be needed.
What changes should a homeowner expect at their tap after applying the C-Series Radon in Water Filter?
Once the C-Series Radon in Water Filter is configured and integrated with your water system, you can expect a reduction in radon concentration in water delivered to your fixtures. This filter targets dissolved radon gas, helping to alleviate the burden on existing equipment that may be reaching its treatment limits. Treated water should maintain normal taste, odor, and clarity with less radon hazard potential, supporting healthier household use.
To confirm your home's radon level and the system's effectiveness, order a certified laboratory test specifically for radon-222 in your water. This test result will settle any questions about your water’s current condition and guide future treatment decisions.
Where this information comes from
Source: USGS groundwater sampling. Sampled 2022-12-08. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.
On record: U.S. Geological Survey sampling of Radon-222 in the 211MRPAU aquifer (Camden County): 3 results from 3 wells, median 89.0 pCi/L, range 62.0-134.0 pCi/L; none above any federal threshold