Autotrol PFAS Forever Chemicals Filter

Buy Now

View full details

What can government PFAS monitoring data in Cleveland County tell me about my home water?

Federal testing for PFAS in the public water supply serving parts of Cleveland County, Arkansas, including the Highway 63 Water Association system, provides measured data for a selection of fluorinated compounds known collectively as PFAS or 'forever chemicals'. These include PFOA, PFOS, PFHxS, PFNA, HFPO-DA, and others. The data documents multiple sampling rounds from 2023 through mid-2025 with no detections above the designated reporting levels and no exceedances of upcoming federal maximum contaminant levels (MCLs) set for 2024. However, it is important to understand that these results reflect the system-wide water quality and do not specify conditions at individual homes. Because local plumbing and well characteristics can influence water quality, only a direct test of your water can clarify your particular PFAS levels.

How do firefighting foam, textile finishing, and landfill sources relate to PFAS in this region?

PFAS compounds have historically been used in various industrial and commercial applications, including in firefighting foams, textile treatments, and landfill leachate. These sources can introduce such chemicals into groundwater over time. Cleveland County’s public water system draws from groundwater sources, which may be susceptible to contamination from local industrial activity or waste sites. Current EPA data for this system shows no PFAS detected above the reporting thresholds, indicating that any contribution from these potential sources is below measurement levels during federal monitoring periods.

How do sampling depth, well characteristics, and water source type affect PFAS detection in this area?

Testing results for PFAS can vary depending on how and where samples are taken. Groundwater wells that serve a community system may draw from different depths or aquifers, which can influence detected concentrations of fluorinated compounds. Shallow wells might reflect surface contamination more readily, while deeper wells can show different PFAS profiles depending on subsurface conditions. Sampling protocols required by federal monitoring focus on representative system points but do not capture every variation found at individual residences. Thus, well depth, sampling location, and source type should be considered when interpreting monitoring results for your own water supply.

How should I compare Cleveland County’s PFAS data with nearby counties without overinterpreting differences?

Comparisons of PFAS monitoring results between counties can be informative but should be made cautiously. Differences in industrial activity, groundwater flow, and water system sources mean that data from nearby counties may not directly apply. For example, a neighboring county might show some detections at or near reporting levels where Cleveland County does not, but that does not imply one county's water is safer or riskier overall. Instead, use regional data to understand general patterns and uncertainties rather than as definitive evidence for any single household’s water quality.

Can you provide a worked example of reading the median and range in this system’s PFAS results?

The EPA’s unregulated contaminant monitoring rule (UCMR5) data for the Highway 63 Water Association includes 10 results for each PFAS compound. For PFOA and PFOS, none of the 10 samples were detected above the reporting level of 0.004 micrograms per liter (4 parts per trillion). This means the median concentration is effectively below that detection threshold, and the range is from non-detected to non-detected in this dataset. Since all samples fell below reporting levels, it suggests that PFAS presence in the water system is very low during the monitoring timeframe, though it cannot confirm zero concentration everywhere or for every sampling moment.

How does the Autotrol PFAS Forever Chemicals Filter address these fluorinated compounds?

The documented treatment technology known as the Autotrol PFAS Forever Chemicals Filter uses a specialized filtration process designed to reduce the presence of per- and polyfluoroalkyl substances in residential water. It targets a broad spectrum of PFAS compounds, including those monitored by federal programs such as PFOA, PFOS, PFHxS, PFNA, and others. This system ships ready to configure for household water lines and offers an option for homeowners whose current equipment may struggle to maintain low PFAS levels under changing water conditions. Although it does not provide absolute removal guarantees, it is a recognized solution to help reduce PFAS concentrations in treated water.

What test should I order to know the real PFAS levels in my home water?

The only way to understand your household’s specific PFAS situation is to have a comprehensive water test performed on a sample taken directly from your tap or well. Look for a test that measures the suite of PFAS compounds individually, including PFOA, PFOS, PFHxS, PFNA, HFPO-DA, PFBS, PFHxA, PFPeA, PFBA, and PFHpA, reporting results in nanograms per liter (parts per trillion). This test result will provide the definitive data needed to decide if additional treatment like the Autotrol PFAS Forever Chemicals Filter is warranted. Without this precise information, reliance on regional system data alone may not adequately reflect your residential water’s PFAS content.

Where this information comes from

Source: EPA SDWIS public water system record. Sampled 2025-07-14. These figures describe the public water system's record, not the plumbing inside any individual building.

On record: EPA UCMR5 monitoring (2023-2025) for HWY 63 WATER ASSOCIATION (AR0000107), AR: 100 results across 10 listed contaminants, 0 detections above the reporting level; nothing detected above the method reporting level