How many samples and wells stand behind the manganese figures for aquifer 112DFSF?
The manganese data for this area in Connecticut comes from U.S. Geological Survey groundwater sampling. Specifically, there are three manganese test results collected from two wells between September 2011 and September 2017. These wells were shallow, between 19 and 24 feet deep. Because this is a relatively small sample size and limited number of wells, the data can provide a general sense of manganese presence in the local aquifer but does not represent every source in the area. Individual wells may vary considerably from these findings, so testing your own water is essential to pinpoint your home's water quality.
Can manganese data from aquifer 112DFSF be directly compared to neighboring counties?
While manganese levels can sometimes show regional patterns, direct comparisons between aquifer 112DFSF in Connecticut and adjacent areas should be approached cautiously. Different geologies, well depths, and sampling methods affect manganese concentrations. Therefore, manganese ranges found in this aquifer, which showed a median of 0.8 micrograms per liter and values from 0.6 up to 180.0 micrograms per liter, should not be assumed to reflect conditions just across the border. Each area and aquifer can have unique manganese characteristics.
What happens if manganese in household water is left untreated over time?
Over years, manganese in water, even at levels within typical regional ranges, may cause visible staining on fixtures and laundry and might contribute to taste or discoloration issues. It is an element naturally occurring in groundwater and not harmful at the concentrations recorded here. However, manganese can accumulate in plumbing, potentially affecting appearance and maintenance needs of household water systems. Treatment is often considered for these aesthetic impacts rather than health concerns.
How does water treated with the Fleck Black Manganese Stains Filter differ at the tap?
When water passes through the Fleck Black Manganese Stains Filter, manganese levels are reduced, which helps prevent staining and discoloration inside pipes, sinks, and laundry. The system improves water clarity and can enhance water taste by addressing manganese content effectively. Treated water typically appears cleaner and reduces buildup associated with manganese deposits.
How does the Fleck System remove or neutralize manganese from household water?
The Fleck Black Manganese Stains Filter uses a media designed specifically to capture manganese particles from water as it flows through. This process physically removes manganese and prevents it from reaching taps. It operates without chemicals, relying on filtration media to trap manganese and reduce its concentration in the treated water supply. Because the system ships ready to configure, it can be set up to match the household's specific water profile once manganese levels are known.
Conclusion
The manganese monitoring record for aquifer 112DFSF in Connecticut is based on a small number of shallow well samples and shows manganese was detected in all three results without exceeding federal health thresholds. This data provides a useful baseline for considering treatment but cannot replace testing of your own water. For more detailed information, refer to the U.S. Geological Survey groundwater monitoring data provided for this region.
Where this information comes from
Source: USGS groundwater sampling. Sampled 2017-09-06. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.
On record: U.S. Geological Survey sampling of Manganese in the 112DFSF aquifer (FIPS 170): 3 results from 2 wells, median 0.8 ug/L, range 0.6-180.0 ug/L; none above any federal threshold
- ✓ 90-Day Money-BackNo restocking fees — return within 90 days.
- ✓ Manufacturer WarrantyGenuine Fleck · Pentair · VIQUA equipment.
- ✓ Free Expert SizingTalk to a specialist and buy the right system the first time.