Fleck Iron + Hard Water (Well) System

Buy Now

View full details

A large household or seasonal property needs the same treatment strategies as smaller homes

In Union Parish, water comes from wells drawing deep from the 124SPRT aquifer, which ranges in depth from 350 to 725 feet. Large households or second homes produce more water usage and demand, which can challenge existing equipment if it cannot keep up. This means that while smaller homes may manage with basic care, the increased flow and volume in larger or seasonal homes may overwhelm treatment systems that were once adequate. Addressing this requires equipment sized to handle higher grain capacity and the combined presence of iron and hardness.

Treated water at the tap reflects removal of common iron and hardness concerns

Once the Fleck Iron + Hard Water (Well) System is in place, treated water typically shows reduced iron staining, improved taste, and less scale buildup from hardness minerals. The system, designed with a grain capacity of 32,000, targets both hardness and iron concentrations, maintaining effectiveness under heavier household demand. This results in water that feels softer and looks clearer, improving household appliance longevity and overall water usability.

Public-system water quality records differ significantly from private-well testing in their scope and findings

Government records, such as U.S. Geological Survey groundwater samples from 7 wells in Union Parish’s aquifer 124SPRT, report iron detected in all 23 sampled results, with a median of 8.5 micrograms per liter and a range up to 920 micrograms per liter. These samples were collected between 2010 and 2012 and reflect area aquifer conditions rather than any single household well. No results exceeded federal safety thresholds, which distinguishes these findings from what a private well test might reveal locally. Private well testing is necessary to confirm specific water quality in your home, particularly for iron and hardness levels.

Commercial or industrial users face additional water quality concerns beyond household needs

Unlike households, commercial or industrial operations in Union Parish may require monitoring for flow rates, equipment scaling tendencies, and operational impacts from iron and hardness. These applications often necessitate more complex water treatment configurations and ongoing water quality management plans tailored to their scale and process sensitivity, which go beyond residential treatment priorities.

The iron concentrations measured in Union Parish water are below federal limits but vary considerably

The detected iron concentrations in aquifer 124SPRT range from 4.0 to 920.0 micrograms per liter. None of these measurements exceed federal health-based thresholds for iron, which means that the presence of iron detected does not imply unsafe water. Instead, elevated iron typically contributes to aesthetic issues like staining or metallic taste and can cause scaling when combined with water hardness. Understanding these distinctions helps homeowners manage treatment expectations and focus on performance improvements rather than safety concerns alone.

Iron naturally enters groundwater in Union Parish’s 124SPRT aquifer through geological processes

Iron is common in groundwater throughout Union Parish due to natural erosion and mineral dissolution in the aquifer rock layers. The 124SPRT aquifer’s depth and geology contribute to consistent iron presence in wells sampled. Hardness also results from dissolved calcium and magnesium minerals. Both constituents can be effectively managed with a well-designed treatment system focused on removing iron and softening hardness to improve water quality for residential use.

In summary, the U.S. Geological Survey’s sampling of seven wells in Union Parish’s 124SPRT aquifer between 2010 and 2012 shows detectable iron in all samples with levels consistent with natural geological conditions and below federal health limits. Homeowners needing better iron and hardness treatment under increased water demand can rely on the Fleck Iron + Hard Water (Well) System, which ships ready to configure and supports a grain capacity of 32,000. For exact water conditions, testing your own well is essential to select the correct treatment approach consistent with government data specific to your area.

Where this information comes from

Source: USGS groundwater sampling. Sampled 2012-09-27. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.

On record: U.S. Geological Survey sampling of Iron in the 124SPRT aquifer (Union Parish): 23 results from 7 wells, median 8.5 ug/L, range 4.0-920.0 ug/L; none above any federal threshold