How the Autotrol System Removes or Neutralizes Iron and Hardness
Iron Oxidation and Filtration Process
The Autotrol Iron + Hard Water (Well) System uses oxidation to convert dissolved iron into solid particles that are then filtered out, effectively reducing iron concentrations in household water.
Hardness Ion Exchange
This system employs ion exchange to replace hardness minerals like calcium and magnesium with non-hardness ions, softening the water and preventing mineral buildup.
High Grain Capacity for Residential Use
With a grain capacity of 32,000, this system is sized to handle typical residential hardness levels, ensuring consistent treatment without frequent regeneration.
Questions Specific to Commercial or Industrial Operators
Volume and Demand Considerations
Commercial users often require higher flow rates and greater capacity, impacting system sizing beyond standard household needs.
Regulatory and Reporting Requirements
Businesses may need to comply with additional water quality reporting and treatment standards not applicable to residential users.
Equipment Durability and Maintenance
Industrial settings might demand more robust equipment and maintenance schedules due to higher wear and operational demands.
Differences in Treated Water at the Tap
Reduced Iron Staining and Taste
After treatment with the Autotrol system, tap water typically shows fewer iron stains on fixtures and a noticeable improvement in taste.
Softer Water Benefits
Softened water improves soap lathering and reduces mineral scale buildup in appliances and plumbing.
Consistent Water Quality
The system ensures steady iron and hardness reduction over time, maintaining water clarity and comfort for household use.
Understanding Certified Laboratory Test Reports
Iron Concentration Range in San Juan County Aquifer
Government sampling shows iron concentrations in the aquifer wells ranging from 230 to 260,000 micrograms per liter, with a median of 1,400 ug/L across 22 samples from 8 wells.
Detection vs. Exceedance
Detection means iron was measured, not that levels surpass any health or safety limit. None of these samples exceeded federal thresholds.
Hardness Not Included in This Dataset
This regional data covers iron only; hardness levels must be determined by specific testing of household water to assess treatment needs accurately.
Impact of Sample Depth, Well Depth, and Source Type
Sample Depth Variation
The sampled wells range from 37 to 101 feet deep; iron levels may vary with depth, influencing treatment sizing.
Well Characteristics Affect Water Quality
Local geology and well construction impact iron and hardness concentrations, so individual testing is necessary to tailor treatment.
Surface vs. Groundwater Sources
The aquifer data reflects groundwater conditions, which differ from surface water; residential well water quality must be evaluated individually.
The Essential Test to Settle Treatment Needs
To size iron and hardness treatment correctly, order a certified laboratory test of your household water specifically measuring both iron and hardness levels. The results will provide the data needed to select an appropriately sized system, such as the Autotrol Iron + Hard Water (Well) System with its 32,000 grain capacity, ensuring effective treatment for your home's water quality conditions.
Where this information comes from
Source: USGS groundwater sampling. Sampled 2025-09-19. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.
On record: U.S. Geological Survey sampling of Iron in the aquifer (San Juan County): 22 results from 8 wells, median 1400.0 ug/L, range 230.0-260000.0 ug/L; none above any federal threshold
- ✓ 90-Day Money-BackNo restocking fees — return within 90 days.
- ✓ Manufacturer WarrantyGenuine Fleck · Pentair · VIQUA equipment.
- ✓ Free Expert SizingTalk to a specialist and buy the right system the first time.