Autotrol Fluoride Filter

Buy Now

View full details

How Treated Water Changes at the Tap with an Autotrol Fluoride Filter

The filter reduces fluoride levels after existing treatment fails

When household equipment designed to address fluoride stops working, your tap water may no longer have the treatment it once did. An Autotrol Fluoride Filter ships ready to configure for residential use and can lower fluoride concentrations in your water by processing it directly at the point of entry. This results in water better adjusted for fluoride content according to your preferences or water quality needs.

Distinguishing Fluoride Issues from Similar Water Concerns

Fluoride is a chemical ion, not the same as water hardness or chlorine taste

Fluoride, measured in milligrams per liter, differs from common water problems like hardness, which involves minerals such as calcium, or the taste and smell effects caused by chlorine. It’s important not to confuse these issues because the treatment methods and equipment differ substantially. Fluoride treatment targets dissolved fluoride ions specifically, unlike water softening or dechlorination systems.

Understanding the Measured Fluoride Range Compared to Federal Guidelines

Samples from Shawano County wells show fluoride levels well below federal limits

Government sampling in the Shawano County 100SDGV aquifer from 2011 to 2024 recorded fluoride from 0.05 to 0.44 mg/L, with a median of 0.205 mg/L. Although fluoride was detected in every sample, none exceeded federal thresholds for safety. It’s key to note that detection does not imply a health violation or unsafe water.

Sample Size and Well Depths Behind These Fluoride Figures

Data is based on 10 samples from 7 wells ranging 10 to 240 feet deep

This local fluoride record comes from a small but diverse set of wells in Shawano County, capturing groundwater at varying depths. While this provides a useful overview of area conditions, individual well results may differ and require personal testing to confirm.

Clarifying Detected, Median, and Range in Area Fluoride Sampling

Detected means fluoride was measurable in all samples, but not necessarily harmful

Detected indicates the presence of fluoride above the instrument’s reporting limit in all tested samples, but this does not equate to a violation or unsafe level.
Median represents the middle value in the dataset, showing a typical fluoride concentration found in these area wells.
Range shows the lowest and highest fluoride levels measured, outlining the variability within this small set of sampled wells.

What a Certified Laboratory Test for Fluoride Reports and How to Read It

Testing confirms fluoride concentration specific to your water source

A certified lab test analyzes your own water sample and reports fluoride concentration in milligrams per liter. To understand if fluoride in your water meets your treatment goals, compare the test result to relevant federal or local guidelines. This single test provides clear, specific data needed to determine if further treatment, such as with an Autotrol Fluoride Filter, is appropriate.

For households in Shawano County seeking to resolve fluoride concerns after previous equipment has failed, ordering a certified laboratory fluoride test on your own water source is the essential step. A test result will confirm fluoride levels precisely and guide any treatment decisions moving forward.

Where this information comes from

Source: USGS groundwater sampling. Sampled 2024-08-07. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.

On record: U.S. Geological Survey sampling of Fluoride in the 100SDGV aquifer (Shawano County): 10 results from 7 wells, median 0.205 mg/L, range 0.05-0.44 mg/L; none above any federal threshold