If You See a Range of Water Hardness in Regional Samples, What Does That Mean?
According to the U.S. Geological Survey’s groundwater sampling in Cleveland County’s aquifer 317GBWG, water hardness—measured as calcium plus magnesium—varied widely, with a median at 35.2 mg/L and a range from 9.51 to 270.0 mg/L. No measurement exceeded any federal threshold. This means that while hardness is present, it does not surpass any federal regulatory levels. However, this does not tell you definitively what your specific well water hardness is, only what was measured in these regional samples taken from wells between 200 and 200 feet deep.
If You Notice Terms Like 'Detected,' 'Median,' and 'Range' in Sampling Data, How Should You Interpret Them?
'Detected' means that the analytical method identified calcium and magnesium in all five samples taken from two separate wells. 'Median' is the middle value of the data set, here 35.2 mg/L, showing a typical concentration in the area. 'Range' expresses the spread from the lowest (9.51 mg/L) to the highest (270.0 mg/L) concentration found. These figures summarize area conditions; they do not specify the exact hardness of your water but help establish the water-quality context in which your facility operates.
If You Observe Faded Laundry, Which Facility Conditions Point to Water Hardness as a Cause?
Faded laundry often results when water contains dissolved minerals such as calcium and magnesium. These minerals can interfere with detergents, reducing their effectiveness and causing fabric colors to dull over time. However, laundry fading can also arise from factors unrelated to water, such as detergent choice, washing machine settings, or fabric type. Confirming whether mineral content in your water is contributing to fading requires testing the hardness level specific to your water supply.
If You Consider Seasonal or Multi-Year Changes, What Does the Sampling Period Reveal?
The samples from Cleveland County’s aquifer 317GBWG were collected over nearly a year—from May 7, 2012, to March 13, 2013. Within this period, hardness levels varied considerably, suggesting that groundwater composition can change seasonally or due to other factors. This variability highlights the importance of ongoing water monitoring to anticipate impacts on laundry quality and process efficiency.
If You Obtain a Certified Laboratory Test for Water Hardness, How Do You Read It?
A certified test will report calcium and magnesium levels, typically expressed in milligrams per liter (mg/L) or grains per gallon. Values help determine water hardness class—soft, moderately hard, hard, or very hard—and inform equipment and chemical dosing decisions. Comparing your specific result against the regional range shows where your water fits in the local context and supports selecting appropriate treatment to protect laundry quality.
To support commercial laundry facilities managing water hardness challenges in Cleveland County, the 36 Fiberglass Tanks - Triplex Unit Skid commercial system skid ships ready to configure. It is designed to handle varying demand levels efficiently, adapting to your measured water conditions to help reduce fading and maintain fabric quality.
Where this information comes from
Source: USGS groundwater sampling. Sampled 2013-03-13. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.
On record: U.S. Geological Survey sampling of Hardness, Ca, Mg in the 317GBWG aquifer (Cleveland County): 5 results from 2 wells, median 35.2 mg/L, range 9.51-270.0 mg/L; none above any federal threshold
- ✓ 90-Day Money-BackNo restocking fees — return within 90 days.
- ✓ Manufacturer WarrantyGenuine Fleck · Pentair · VIQUA equipment.
- ✓ Free Expert SizingTalk to a specialist and buy the right system the first time.