Fleck Dry, Itchy Skin System

Buy Now

View full details

1. What Your Water Test Report Tells You About Doña Ana County

If you obtain a laboratory test for water quality focusing on skin dryness concerns, it will report levels of minerals like calcium and magnesium, which contribute to the water's mineral content. For Doña Ana County, samples taken from the local aquifer (110AVMB) show these minerals in measurable amounts but within acceptable ranges. These figures come from seven samples across five wells tested between 2010 and 2017. While these minerals are detected everywhere in the samples, none surpassed federal limits, indicating no regulatory health concern, although they may influence water's feel on your skin.

2. How Variations Over Time Affect Your Household Water

The water mineral content in this area shows a wide range from one sample to another—between 203 and 3460 mg/L—across the multi-year period of record. This variation means water quality can shift seasonally or year-to-year even within the same aquifer. If your household's current water treatment equipment is struggling to keep up, fluctuating mineral levels could be part of the reason. Understanding these variations helps set expectations for ongoing water feel and skin effects during the year.

3. Influence of Well and Sample Depth on Water Quality Expectations

The data reflects samples drawn from wells between 40 to 90 feet deep. Depth influences which part of the aquifer your water is drawn from and may affect mineral amounts. Shallow wells may differ from deeper ones, so the local average and range provide a reference but do not define your exact water profile. Knowing your well's depth and testing your specific water are key steps to matching treatment to your needs.

4. Public Water System Data Versus Private Well Testing

Public water systems are tested frequently and report health-based limits compliance, but this data comes from different methods and sources than private well tests. The Doña Ana aquifer figures come from private well samples and represent mineral presence rather than safety measures. Thus, while they provide useful context for your water’s mineral content related to dry skin, only a private well test can confirm your individual water conditions.

5. Adjusting for Household Size and Seasonal Use in Water Treatment

Larger households or properties used seasonally may require different treatment approaches to effectively address dry skin related to mineral content. If your existing system works but is overwhelmed, daily water demand or intermittent high usage could exceed its capacity. Recognizing these usage patterns helps determine if a system with greater capacity or a tailored technology is needed to maintain water feel that supports skin comfort.

6. Understanding Terms: Detected, Median, and Range in Local Water Data

'Detected' means the minerals were measured above the instrument's minimum reporting level in all sampled wells. 'Median' is the middle value (628 mg/L) of all measurements, offering a typical mineral concentration seen. 'Range' describes the spread from the lowest (203 mg/L) to the highest (3460 mg/L) mineral levels recorded, reflecting natural variation within the aquifer. These terms help interpret your region’s water profile without assuming your water matches any specific measurement.

When you evaluate your household’s water test results and account for usage, the Fleck Dry, Itchy Skin System ships ready to configure and can provide effective management of mineral-related water effects for skin comfort, especially when current equipment no longer suffices.

Where this information comes from

Source: USGS groundwater sampling. Sampled 2017-02-23. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.

On record: U.S. Geological Survey sampling of Hardness, Ca, Mg in the 110AVMB aquifer (Doña Ana County): 7 results from 5 wells, median 628.0 mg/L, range 203.0-3460.0 mg/L; none above any federal threshold