Pentair Corrosive Water Damaging Pipes Filter

Buy Now

View full details

Belief: If Your Existing Treatment Works, Capacity Is Sufficient for Household Use

Many households assume that functioning water treatment equipment automatically meets their daily water demand. However, even if your current system reduces corrosive effects, it may not be sized to handle the volume used by your household, leading to diminished protection as water usage increases.

Belief: Treatment Needs Are the Same Regardless of Household Size or Usage Patterns

Households vary widely in water consumption. Large families, secondary homes, or seasonal residences often experience fluctuating water use that can exceed the capacity of standard treatment systems. This variation requires reassessing treatment demands to ensure ongoing control of corrosive water effects.

Belief: Treated Water Quality Is Unchanged at the Tap Regardless of System Capacity

The quality of treated water depends on the system’s ability to handle the actual volume of water passing through it. When treatment capacity is insufficient, corrosive elements may not be fully mitigated, resulting in water that can continue to damage plumbing. Properly scaled treatment improves the tap water’s characteristics by reducing corrosive potential.

Belief: Water Quality Remains Constant Over Time, So One System Configuration Is Permanent

USGS groundwater data from Hampden County’s 112SRFD aquifer, collected between 2011 and 2017, show chloride detected in all samples with a median of 34.6 mg/L and a range from 3.18 to 633.0 mg/L. These results demonstrate natural seasonal and multi-year fluctuations. Treatment systems need to accommodate this variability to maintain effectiveness.

Belief: Public Water System Records Reflect Private Well Conditions Accurately

Area aquifer sampling provides broad regional information but does not substitute for testing a private well. Public system data show general trends in water quality but individual wells can differ substantially. To precisely understand your household’s water condition, specific testing of your water source is necessary.

Belief: Comparing Local Water Quality Data with Nearby Counties Provides Definitive Answers

While neighboring counties may have similar geological features, their aquifers and water chemistry often differ. Direct comparison between Hampden County's chloride data and data from adjacent areas should be done cautiously without assuming identical conditions. Each area’s data informs regional understanding but does not predict individual household water quality.

For households in Hampden County that find their existing equipment can no longer meet water treatment demands to reduce corrosive water impact, the Pentair Corrosive Water Damaging Pipes Filter system ships ready to configure. Its capacity to match your measured daily water usage helps protect plumbing by addressing corrosive conditions documented in the area’s groundwater.

Where this information comes from

Source: USGS groundwater sampling. Sampled 2017-08-10. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.

On record: U.S. Geological Survey sampling of Chloride in the 112SRFD aquifer (Hampden County): 12 results from 10 wells, median 34.6 mg/L, range 3.18-633.0 mg/L; 1 above an AESTHETIC secondary standard only (secondary standard 250.0 mg/L (aesthetic)) - not a health finding