Pentair Corrosive Water Damaging Pipes Filter

Buy Now

View full details

Government Sampling Records on pH in Clackamas County Aquifer 110ALVM

The U.S. Geological Survey has recorded pH measurements from three wells ranging from 57 to 71 feet deep within Clackamas County's aquifer 110ALVM. Over 18 samples collected from 2010 to 2012 reveal a median pH of 7.35 standard units, with values ranging from 6.6 to 7.7. These figures fall within the EPA's secondary standard for pH, which spans 6.5 to 8.5, a range associated with aesthetic and corrosivity considerations rather than health concerns.

The Influence of Plumbing Materials and Age on Corrosivity Effects

While source water pH provides context on corrosivity potential, the type and condition of household plumbing substantially affect how corrosive water manifests. Older pipes made from metals prone to corrosion may suffer more damage even if the water's pH is near neutral. Materials such as copper and galvanized steel are particularly vulnerable to water outside the neutral pH zone. Consequently, observing pipe degradation or leaks may relate to both water chemistry and pipe age rather than water source alone.

Additional Considerations for Commercial and Industrial Water Users

Commercial and industrial operators face further complexities. They often require continuous monitoring, account for varied water usage patterns, and consider equipment compatibility with corrosive water. These factors demand specialized assessments beyond the scope relevant to household systems, which mainly focus on protecting residential plumbing and fixtures.

Sample Size and Its Implications on Data Interpretation

The data from Clackamas County involves 18 samples collected from three wells over two years. Although useful, this limited sample size means individual household water conditions can vary significantly. The samples provide an overview of regional groundwater but cannot replace specific testing for each well or household system. For precise corrosivity assessment, direct testing of the home's water supply is essential.

Ruling Out Causes: From Basic Checks to Laboratory Tests

Households experiencing equipment failure due to potential corrosive water should first inspect plumbing materials and visible damage. Next, simple water characteristics like pH and hardness can be tested using at-home kits. If issues persist or worsen, a professional laboratory analysis is advisable to determine the exact water chemistry, including pH and other factors influencing corrosion potential.

How Pentair Corrosive Water Damaging Pipes Filter Addresses Corrosivity

The Pentair Corrosive Water Damaging Pipes Filter system is designed to mitigate the effects of acidic or corrosive water by conditioning and stabilizing pH levels. This technology works to neutralize water that is slightly acidic before it contacts household plumbing, reducing corrosion rates and extending the life of pipes and fixtures. The system ships ready to configure for direct purchase and use.

Impact of Well Depth and Source Type on Corrosivity Expectations

Wells sampled in this area lie between 57 and 71 feet deep, reflecting typical groundwater conditions for the aquifer. Deeper wells often encounter different water chemistry than shallow sources, sometimes exhibiting more stable pH ranges. Surface water or shallower wells might display greater fluctuations and potentially greater corrosivity risk. Understanding well depth helps set expectations but does not replace water testing at the point of use.

In summary, Clackamas County groundwater in aquifer 110ALVM generally falls within a pH range compatible with reduced corrosivity risk, according to government sampling. However, household plumbing factors and local variations mean specific water testing is critical before selecting mitigation steps. The Pentair Corrosive Water Damaging Pipes Filter offers a documented solution to neutralize corrosive water effects, helping households safeguard their plumbing systems.

Where this information comes from

Source: USGS groundwater sampling. Sampled 2012-06-06. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.

On record: U.S. Geological Survey sampling of pH in the 110ALVM aquifer (Clackamas County): 18 results from 3 wells, median 7.35 standard units, range 6.6-7.7 standard units; EPA secondary standard for pH is 6.5-8.5 (aesthetic/corrosivity, not health-based); 0 of 18 sampled results fell below 6.5