If you notice changes or issues at your faucet—taste, staining, or other water quality concerns—and you rely on a complete well in Orange County, understanding the area's water data can guide your next steps. This page helps you interpret government sample records related to the aquifer beneath Orange County and decide how to proceed with treatment options.
If you want to know the basis for the area's water quality information
The data comes from the U.S. Geological Survey (USGS), drawing on 1822 total dissolved solids (TDS) measurements taken from 44 wells between 2010 and 2026 in the Orange County area aquifer labeled 120FLRD. These wells vary from 280 to 1500 feet deep, providing a broad picture of regional groundwater characteristics. However, the number of wells sampled and their depth ranges mean the data provide a general sense—not specifics for your individual well.
If you are preparing to seek advice on treating your well water
Before pursuing treatment options, document your well's details: depth, flow rate, any recent changes in water quality or taste, and results from any private water tests you have. Note if you observe staining on fixtures or feel unusual tastes or textures. This information will be essential to determine if treatment beyond what is suggested by regional data is needed.
If you want clarity on the terms median, range, and detected as they appear in water data
The median TDS value in the area's samples is 561 mg/L, meaning half the measurements were above and half below this level. The range spans from as low as 0.44 mg/L to a high of 20,800 mg/L, indicating significant variation across wells. Most results (1803 of 1822) detected some level of dissolved solids; 19 samples were below reporting limits. Detection means the substance was measurable but does not imply a problem.
If you are comparing Orange County’s aquifer water quality to that of nearby counties
Differences in median or range figures between neighboring counties reflect natural geological and hydrological variability. Use regional comparison to know whether your area tends toward lower or higher dissolved solids generally, but do not assume local well conditions mirror adjacent counties exactly. Individual well testing remains essential.
If you want a homeowner’s interpretation of the median and range in this data
Think of the median value as a typical dissolved solids level in this aquifer, with the range showing possible extremes. Your well's TDS could be near the median or fall anywhere within the range. High dissolved solids levels can affect taste and cause staining but are aesthetic considerations, not safety concerns. To understand your home's specific water quality, a private water test is necessary.
If you want to know how public water system records differ from private well testing
Public water system reports often include compliance with health-based standards and treatment details for supplied water. Private well testing measures your specific source and is the only way to confirm your well water’s characteristics. Regional public data do not reveal your private well's exact conditions but provide valuable context.
Closing: What area aquifer data should not lead you to conclude
Do not assume the median or range values indicate your private well's condition precisely. Detected levels of total dissolved solids above aesthetic secondary standards in the public data do not mean your water is unsafe or violates regulations. Private water analysis is the only reliable method to confirm your water quality and to decide if treatment is appropriate.
Addressing Complete Well Water Quality with Fleck Technology
For households seeking to manage dissolved solids and general well water challenges in Orange County, the Fleck Complete Well System offers a documented solution. This system ships ready to configure and has a capacity of 32,000 grains, designed to handle typical household water demands. It can improve water quality at the tap, addressing taste and staining issues related to dissolved solids, aligning with the data you have about your area aquifer.
Where this information comes from
Source: USGS groundwater sampling. Sampled 2026-05-27. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.
On record: U.S. Geological Survey sampling of Total dissolved solids in the 120FLRD aquifer (Orange County): 1822 results from 44 wells, median 561.0 mg/L, range 0.44-20800.0 mg/L; 977 above an AESTHETIC secondary standard only (secondary standard 500.0 mg/L (aesthetic)) - not a health finding
- ✓ 90-Day Money-BackNo restocking fees — return within 90 days.
- ✓ Manufacturer WarrantyGenuine Fleck · Pentair · VIQUA equipment.
- ✓ Free Expert SizingTalk to a specialist and buy the right system the first time.