Pentair Chromium-6 Filter

$1,420.00

Buy Now

View full details

If you think the UCMR3 survey reflects your home's chromium-6 level exactly

The Unregulated Contaminant Monitoring Rule (UCMR3) was a federal effort to understand the occurrence of certain substances, including chromium-6, across many public water systems nationwide. Its data cover public water systems, such as the Salt Lake City Water System serving much of Salt Lake County, but they don’t provide a specific concentration for any individual household's water. This means the chromium-6 results from the system are a general area snapshot, not a precise reflection of your home's water. To know your household's chromium-6 level, you must conduct a dedicated water test of your own tap.

If you want to understand why California has a chromium-6 guideline and what it means for Salt Lake

California has set a public health goal for chromium-6 at 10 micrograms per liter (µg/L) or parts per billion (ppb), motivated by health risk considerations specific to that state. This limit guides treatment decisions there but is not a federal regulation. Salt Lake City Water System data from 2013-2015 show a highest chromium-6 measurement of 2.0 µg/L, well below California's advised level, with most detections much lower. The presence of such data encourages informed decisions but does not equate to a federal violation or mandate. Households outside California should view these guidelines as a reference point, not a regulation.

If the plumbing in your home may influence chromium levels separately from source water

Chromium-6 levels measured at the public water system originate from the source water, which for Salt Lake City Water System is surface water. However, your home's plumbing materials and age can affect water quality, potentially altering chromium speciation or adding other metals. Older pipes or certain fittings might influence water chemistry, so addressing chromium-6 concerns may require considering both the water supply and internal plumbing. This distinction highlights why testing your home's water is necessary for a complete picture.

If you are weighing ion exchange against reverse osmosis for chromium(VI) treatment after equipment failure

Two common methods for addressing chromium(VI) in residential water are ion exchange and reverse osmosis technologies. Ion exchange exchanges chromium ions with other ions on a resin medium, effectively reducing chromium-6 levels. Reverse osmosis uses a semipermeable membrane to filter out chromium(VI) along with various dissolved solids and contaminants. Each technology has different operational characteristics, maintenance needs, and effectiveness profiles. When existing equipment has failed, selecting a technology that matches your household’s water use and chromium-6 concerns is critical. The Pentair Chromium-6 Filter utilizes a design based on ion exchange to address chromium(VI) specifically, shipping ready to configure for your water conditions.

If you want to understand what the federal total chromium MCL indicates about measured chromium-6 levels

The federal Maximum Contaminant Level (MCL) for total chromium in drinking water is 100 µg/L (ppb). The Salt Lake City Water System measurements for chromium-6 ranged from nondetectable levels to a maximum of 2.0 µg/L, well below the total chromium MCL. Because chromium-6 is only a part of total chromium, these findings imply that chromium-6 levels in this water system do not approach federal limits. Importantly, detected concentrations do not mean the water is unsafe; detection simply means an instrument found chromium-6 above a low reporting threshold. In your household context, testing can confirm if your water aligns with these system-wide numbers.

If you are a commercial or industrial operator considering chromium-6 beyond residential concerns

Commercial and industrial water users face additional considerations like larger water volumes, specific regulatory demands, and process sensitivities. These factors require a broader evaluation, including routine monitoring, treatment capacity, and compliance with occupational standards that may differ from residential needs. Residential household concerns about chromium-6 focus mainly on health and taste-related effects, along with equipment compatibility. For a household, the approach remains testing your water and applying appropriately sized treatment technology like the Pentair Chromium-6 Filter.

Summary: This page has clarified that federal UCMR3 chromium-6 data describe system-wide water rather than individual homes, highlighted California's chromium-6 guideline as a reference rather than a mandate, explained the impact of plumbing, and contrasted key treatment technologies to address chromium(VI) after equipment failure. It also contextualized measured chromium-6 levels against federal regulatory standards and noted additional factors for commercial water users. Your next step is to test your specific household water and consider a direct-purchase Pentair Chromium-6 Filter that ships ready to configure for your situation.

Where this information comes from

Source: EPA SDWIS public water system record. Sampled 2014-01-06. These figures describe the public water system's record, not the plumbing inside any individual building.

On record: EPA UCMR3 monitoring (2013-2015) for Salt Lake City Water System (UTAH18026), UT: 74 results across 2 listed contaminants, 65 detections above the reporting level; no federal MCL for hexavalent chromium; total chromium MCL 100 ug/L