What should I note about my water before seeking arsenic treatment advice?
Before considering any treatment for arsenic, document your water source characteristics: the well depth, the date and results of any arsenic tests done specifically on your water, and the aquifer or groundwater system it draws from—here, that would be the Kent County aquifer 112CLMB. Note that only a direct test of your own water can establish arsenic levels in your home supply.
How do the dates and ranges of arsenic sampling affect what I should understand?
Sampling in Kent County’s aquifer 112CLMB was conducted over a long period, from July 2011 through July 2024, covering six wells and totaling thirteen results. The median arsenic concentration measured was 0.365 micrograms per liter, with values ranging from 0.03 to 1.1 micrograms per liter. This reflects natural variation over time and across wells, indicating that arsenic presence fluctuates but generally stays within a low concentration range in this aquifer.
How do sample and well depths affect expectations for arsenic in my water?
Samples came from wells between 9 and 54 feet deep. These depths represent shallow to moderate groundwater sources where arsenic levels may vary due to local geology and groundwater movement. Your own well depth relative to this range can influence arsenic concentration, but cannot replace testing your specific water.
What does the measured range mean compared to federal standards, and what does it not mean?
No arsenic sample in the Kent County aquifer 112CLMB data exceeded federal arsenic standards, which are protective health-based thresholds. Detection of arsenic in some samples simply means the element was measurable; it does not indicate a safety violation or health risk by itself. The aesthetic secondary standards that might affect taste or staining are separate and not applicable here. Thus, while arsenic is present at low levels in some area wells, these measurements alone do not imply your well water contains unsafe arsenic levels.
How often does the Fleck Arsenic Filter require maintenance?
The Fleck Arsenic Filter system, designed to reduce arsenic in residential water, operates with routine upkeep typical for home water treatment units. Maintenance includes periodic checks and replenishing or replacing filtration media as recommended by the manufacturer. This rhythm keeps the system functioning optimally without unexpected demands.
To summarize, government arsenic monitoring in the Kent County aquifer 112CLMB reveals a generally low and variable presence of arsenic over multiple years and depths. You should test your own water to determine arsenic levels specific to your household. If treatment is indicated, the Fleck Arsenic Filter is a documented solution ready to configure for arsenic reduction in home water supplies.
Where this information comes from
Source: USGS groundwater sampling. Sampled 2024-07-30. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.
On record: U.S. Geological Survey sampling of Arsenic in the 112CLMB aquifer (Kent County): 13 results from 6 wells, median 0.365 ug/L, range 0.03-1.1 ug/L; none above any federal threshold
- ✓ 90-Day Money-BackNo restocking fees — return within 90 days.
- ✓ Manufacturer WarrantyGenuine Fleck · Pentair · VIQUA equipment.
- ✓ Free Expert SizingTalk to a specialist and buy the right system the first time.