Local Arsenic Measurements from Government Sampling
According to U.S. Geological Survey groundwater data for Highlands County, Florida, arsenic has been detected in three samples taken between 2015 and early 2026 from two separate wells drawing from the aquifer known as 120UFAQ. These wells were sampled at depths of approximately 1520 to 1530 feet. The arsenic concentrations recorded ranged narrowly from 0.22 to 0.28 micrograms per liter, with a median value of 0.27 micrograms per liter.
It is important to emphasize that these figures represent regional groundwater conditions based on specific well samples, not the arsenic content in any single household's water. No sample from these measurements exceeded any federal regulatory thresholds for arsenic, which helps provide context for water quality in the area.
What Arsenic in Water Means for Your Household
Arsenic is a naturally occurring element that can dissolve into groundwater over time. While the detected levels in this area are low and below federal limits, the presence of any arsenic warrants awareness because long-term exposure to higher concentrations can have health implications. Arsenic itself does not impart flavor or odor, so households cannot rely on sensory detection to assess its presence.
To know the arsenic concentration in your own household water, a specific water test conducted on a sample drawn from your tap or well is necessary. Such testing offers a definitive measurement and establishes whether your water warrants treatment for arsenic reduction.
Approaches to Managing Arsenic in Residential Water Supplies
If testing shows arsenic levels in your household water above your comfort threshold or recommended guidelines, treatment options exist to reduce arsenic concentration effectively. One documented technology for this purpose is an adsorptive media system, which works by removing arsenic ions as water passes through a specialized filtering material.
The WSP 10 GPM Whole House Arsenic Reduction System uses this adsorptive media technology and is designed to handle typical household water demand flows up to 10 gallons per minute. This system ships ready to configure, facilitating integration with your home's water supply to lower arsenic levels throughout the entire household water system.
Next Steps and Considerations
- Obtain a water test specific to your household water source to establish arsenic concentration.
- Consider treatment solutions like the WSP 10 GPM system if arsenic levels surpass personal or recommended guidelines.
- Maintain awareness of local water quality reports and consult qualified water testing services to stay informed.
Understanding regional arsenic measurements provides context but cannot substitute for testing individual water sources. Taking targeted action based on your household data ensures safe and pleasant water quality tailored to your needs.
Where this information comes from
Source: USGS groundwater sampling. Sampled 2026-01-26. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.
On record: U.S. Geological Survey sampling of Arsenic in the 120UFAQ aquifer (Highlands County): 3 results from 2 wells, median 0.27 ug/L, range 0.22-0.28 ug/L; none above any federal threshold
The documented solution
- ✓ 90-Day Money-BackNo restocking fees — return within 90 days.
- ✓ Manufacturer WarrantyGenuine Fleck · Pentair · VIQUA equipment.
- ✓ Free Expert SizingTalk to a specialist and buy the right system the first time.