Pentair Arsenic Filter

Buy Now

View full details

1. What the Measured Arsenic Range Means Against Federal Standards, and What It Does Not Mean

Government groundwater sampling in Fayette County’s aquifer 327PCNS recorded arsenic concentrations ranging from 0.05 to 0.11 micrograms per liter (µg/L), with a median of 0.075 µg/L, based on four samples from three separate wells collected between 2011 and 2016. Importantly, none of these results exceeded any federal maximum contaminant level for arsenic. This means the samples did not detect arsenic at levels that federal regulations consider requiring action or indicating risk. However, these measurements do not specify the arsenic concentration in your own home water supply; only testing your specific well water can provide that information.

2. How to Compare This Area's Record With a Neighboring County's Without Overreading It

While Fayette County’s arsenic readings reflect samples from a particular aquifer, neighboring counties may show different ranges due to geology and sampling differences. Comparing these figures can offer context but should not be interpreted as a direct forecast of your water quality. Each aquifer and well has unique conditions, so regional data serve as background rather than individual assessments.

3. The Role of Plumbing Material and Age, Separate From the Source Water

Arsenic in your tap water originates from the source, but plumbing materials and system age do not contribute to arsenic levels. These factors can affect other water quality aspects such as taste or appearance but do not alter arsenic concentrations. Therefore, addressing arsenic requires focusing on source water characteristics and treatment options, rather than plumbing modifications.

4. How the Documented Treatment Technology Removes or Neutralizes Arsenic

Arsenic is effectively reduced with filtration technology designed specifically for this contaminant. The Pentair Arsenic Filter employs media that adsorbs arsenic molecules, lowering concentrations in the water flow and improving tap water safety and quality. This system ships ready to configure for household use, providing targeted arsenic reduction based on your water’s test results.

5. How Sample Depth, Well Depth or Source Type Changes What a Reader Should Expect

The government samples underlying this data were taken from wells 255 to 400 feet deep. Well depth and source type influence water composition as deeper wells may draw from different water-bearing layers with varying arsenic presence. If your water source differs in depth or type, arsenic levels could be higher or lower than the reported range. Testing your own well water remains the essential step to understand your specific situation.

Closing: The Single Test to Order and What Result Would Settle the Question

To conclusively determine whether arsenic is present at concerning concentrations in your household water, a certified laboratory arsenic test of your well or tap water is necessary. A result above the federal standard would indicate the need for targeted treatment such as the Pentair Arsenic Filter. A result within the federal standard range would generally not require special arsenic treatment, though personal preference or additional factors might influence your decision.

Where this information comes from

Source: USGS groundwater sampling. Sampled 2016-09-06. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.

On record: U.S. Geological Survey sampling of Arsenic in the 327PCNS aquifer (Fayette County): 4 results from 3 wells, median 0.075 ug/L, range 0.05-0.11 ug/L; none above any federal threshold