Pentair Arsenic Filter

Buy Now

View full details

Government groundwater samples from aquifer 327PCNS in Fayette County, West Virginia, found arsenic levels ranging from 0.05 to 0.11 micrograms per liter across four tests from three separate wells, all between 255 and 400 feet deep. No sample exceeded federal arsenic thresholds. This information is from public-area data and does not represent your individual well’s conditions.

If you understand how public sampling differs from private well testing

The USGS area aquifer samples provide an overview of arsenic presence in Fayette County’s groundwater but do not measure your specific household water. Private wells should be tested directly by certified labs to determine exact arsenic levels. Area data suggests a background level but cannot confirm safety or risk at your tap. Testing your well is necessary before choosing treatment.

If your household is large, a second home, or used seasonally

Households with higher water use or seasonal homes may experience different arsenic-related concerns than a typical residence. Larger volumes of water might require treatment systems with higher capacity, and inactivity periods in second homes might impact filter performance. If arsenic is present in your well water, any treatment equipment, such as the Pentair Arsenic Filter, that ships ready to configure can be considered based on water demand.

If you want to know what the measured range means against federal standards

The federal standard for arsenic in drinking water is 10 micrograms per liter. The Fayette County aquifer samples show arsenic concentrations far below this limit. This means the sampled water does not exceed safety thresholds set by the EPA. However, the federal standard is a health-based threshold and does not address other factors like taste or staining. Your private well testing results should be compared directly to this standard when considered.

If you want to interpret terms like 'detected', 'median', and 'range' in sampling records

• Detected: The sampling instruments measured arsenic levels in all tested wells; detection indicates presence but not necessarily a health risk.
• Median: The middle value in the data set, here 0.075 micrograms per liter, showing a central tendency of arsenic levels in the sampled wells.
• Range: The spread between the lowest and highest arsenic measurements (0.05 to 0.11 micrograms per liter) in the samples.

Understanding these terms clarifies that while arsenic is consistently detectable in Fayette County groundwater, concentrations are low relative to legal and safety benchmarks.

If your household notices symptoms or issues that could relate to arsenic in water

Arsenic in water is tasteless and odorless, so visual or sensory signs rarely indicate its presence. Health concerns related to arsenic exposure develop over long periods and cannot be diagnosed by household symptoms alone. If your household experiences unusual health or water quality issues, a certified laboratory test specific to your well water is essential to determine arsenic presence and guide treatment decisions.

In summary, Fayette County aquifer data indicates arsenic is present in low concentrations well below federal drinking water standards. This regional information can guide you toward testing your private well water for precise arsenic levels before choosing treatment options. The Pentair Arsenic Filter is one documented equipment solution available for purchase that ships ready to configure to address arsenic when testing shows it is needed.

Where this information comes from

Source: USGS groundwater sampling. Sampled 2016-09-06. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.

On record: U.S. Geological Survey sampling of Arsenic in the 327PCNS aquifer (Fayette County): 4 results from 3 wells, median 0.075 ug/L, range 0.05-0.11 ug/L; none above any federal threshold