Regional Arsenic Levels in Walton County's Aquifer 120UFAQ
The U.S. Geological Survey has sampled groundwater in the Walton County area, specifically from the 120UFAQ aquifer, to provide a general picture of arsenic concentrations that may be encountered. Three results from two separate wells, sampled between March 2015 and January 2026, showed arsenic detected in all samples with a median concentration of 1.4 micrograms per liter (µg/L) and a range from 0.49 to 1.5 µg/L. These wells were drilled to depths between 500 and 621 feet.
It is important to note that these measured arsenic levels are below all applicable federal thresholds for drinking water. This indicates that, regionally, arsenic is present but not detected at levels that federal regulations define as a violation or unsafe. However, these values represent area-wide data and do not describe a specific well or commercial water system's concentration. Only direct water testing of your building’s source can establish the arsenic level in your supply.
Why Arsenic Matters for Commercial Water Systems
Arsenic is a naturally occurring element found in some groundwater sources. Although regional levels might be low, arsenic can pose concerns for commercial buildings due to the volume and variety of water usage points that require treatment. Managing arsenic for an entire building demands a comprehensive approach rather than addressing one outlet at a time.
Arsenic's presence can affect water taste, odor, and potentially contribute to long-term health concerns if levels exceed regulatory limits. Even regional concentrations within accepted limits warrant monitoring and consideration when designing water treatment solutions for commercial operations.
Determining Your Building’s Arsenic Level
To understand the arsenic concentration impacting your commercial facility, obtain a water quality test specific to your water source. Samples collected across Walton County aquifer 120UFAQ help form a backdrop but cannot substitute for your well or supply system analysis. Testing laboratories accredited for arsenic analysis can provide precise measurements essential for informed treatment decisions.
Addressing Whole-Building Arsenic Treatment Needs
When treating water for a commercial building, the solution must accommodate large daily volumes and multiple points of use. A single-point treatment may not suffice for the entire supply, especially in operations with high water demand.
A documented technology effective for whole-building arsenic removal is the 1600 GPD Reverse Osmosis System. This system is designed to process up to 1600 gallons per day, with a substantial 4x40 tank capacity, making it capable of handling large commercial water flows. Reverse osmosis utilizes a semipermeable membrane to reduce arsenic and other dissolved constituents, producing treated water distributed throughout the building.
Benefits of Reverse Osmosis for Commercial Water Treatment
- High-capacity treatment supporting entire building supply needs
- Effective reduction of arsenic consistent with federal water treatment standards
- Compact system that ships ready to configure without requiring specialized labor
- Improved water quality supporting operational and regulatory compliance
Next Steps for Commercial Operators in Walton County
Understanding regional data is a useful starting point, but confirming your facility’s specific arsenic levels through water testing is crucial. Once results are obtained, evaluating treatment options that fit your building size and water use profile will help safeguard water quality.
Consider a whole-building reverse osmosis system designed to address arsenic efficiently and reliably. This approach supports commercial operations needing consistent arsenic reduction across multiple water outlets and high daily water volumes.
For detailed system specifications and to discuss your commercial water treatment requirements, contacting WaterSoftenerPlus for a quote on a 1600 GPD Reverse Osmosis System is recommended.
Where this information comes from
Source: USGS groundwater sampling. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.