Fleck Hard Water System

$750.00

Buy Now

View full details

Water Quality Context in Palm Beach County's 110SAQS Aquifer

Groundwater sampling by the U.S. Geological Survey has provided a comprehensive picture of water quality in the 110SAQS aquifer serving Palm Beach County. Thirty-two wells, each between 10 and 77 feet deep, were sampled from 2011 through 2016. These results showed hardness levels ranging broadly—from 32.5 mg/L up to 408.0 mg/L—with a median value of 256.5 mg/L. This reflects a naturally occurring presence of calcium and magnesium ions in the water.

Importantly, none of these samples exceeded any federal thresholds established for safety or health concerns. Hardness and acidity levels in this area are typical for groundwater drawn from limestone and related formations and are not considered violations of any regulatory limits. This distinction is crucial to understand: detection of these minerals indicates their presence but does not imply any unsafe condition.

Impact of Acid and Hardness on Household Water Systems

Hard water, characterized by elevated calcium and magnesium, can cause scaling on plumbing fixtures, reduce soap effectiveness, and leave mineral deposits on dishes and surfaces. Acidic water, often measured by its pH, can contribute to corrosion of pipes and fixtures, affecting taste and possibly increasing metal leaching.

When water treatment equipment fails, these effects can become prominent quickly, leading to discomfort, increased maintenance costs, and potential damage to household plumbing.

Why Testing Your Own Water Is Essential

While regional data provides a valuable overview, water conditions can vary significantly from one well to another within the same aquifer. Identifying your home's actual water chemistry requires testing the water directly from your tap or well. Tests to measure hardness levels and water acidity (pH) will reveal the extent to which these factors are affecting your supply.

Addressing Acid and Hardness with the Total Well Chemical Feed System

For homeowners facing acid and hardness problems, especially following failure of existing equipment, chemical feed technology offers a targeted solution. The Total Well — Complete Chlorination Whole-Home System is designed to handle water treatment with a capacity of 48,000 grains, processing up to 17 gallons per day at 9 gallons per minute through a 10x54 tank. It introduces a controlled chemical feed that can neutralize acidity and condition hardness minerals, improving water quality throughout the household.

This system ships ready to configure, providing a comprehensive approach to maintaining water quality and protecting your home's plumbing and appliances.

What to Consider Before Choosing Treatment Options

• Verify your home's water chemistry with specialized testing to understand the specific levels of hardness and acidity.
• Review the capacity needs based on household water use to select a chemical feed system that matches demand.
• Understand that regional government data can help anticipate potential water issues but does not replace individual testing.
• Consider the benefits of a whole-home system that integrates chemical feed treatment for comprehensive improvement.

By recognizing the natural water conditions outlined by government surveys and taking steps to test and treat your own water supply, you can restore water quality and protect your home from the effects of acid and hardness after equipment failure.

Where this information comes from

Source: USGS groundwater sampling. Sampled 2016-08-22. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.

On record: U.S. Geological Survey sampling of Hardness, Ca, Mg in the 110SAQS aquifer (Palm Beach County): 32 results from 32 wells, median 256.5 mg/L, range 32.5-408.0 mg/L; none above any federal threshold

The documented solution

Total Well — Complete Chlorination Whole-Home System

Request a Quote