← All parts indexes by model number
Stenner peristaltic pumps are identified by a model code that encodes the feed rate and the supply voltage — for example a 30 GPD unit at 115 volts. That code is on the label on the pump housing, and it determines which tube and which pump head you need. The tube is a wear part and is the single most commonly ordered item for these pumps.
Below, our Stenner stock is listed with the part number from each product's own name. Pump tubes are consumables and are usually replaced on a schedule rather than on failure; running one to destruction tends to take the pump head with it.
When ordering a tube, match both the pump model and the tube size, as the same pump body accepts more than one tube depending on the feed rate it was configured for. If the pump runs but no longer meters correctly, the tube is the first thing to check; if it does not run at all, the motor or the power supply is the more likely cause.
Stenner pumps & replacement parts
41 items listed under this model.
- —Stenner #1 Tube Assembly for Chemical Feed Pumps, 5-Pack — STMCCP201-5, Stenner #1 Tube Assm. (5-Pk), MCCP201$141.91
- —Stenner #1 Tube Assm. (2 Pk), UCCP201 (STUCCP201)$72.19
- —Stenner #2 Adap Tube Hsng$160.12
- —Stenner #2 Tube Assembly, 5-Pack — STMCCP202-5, Stenner #2 Tube Assm. (5-Pk), MCCP202$135.71
- —Stenner #2 Tube Assm,1/4 (2 Pk), UCCP202 (STUCCP202)$69.52
- —Stenner #5 Tube Assem. (2 Pk), UCCP205 (STUCCP205)$72.19
- —Stenner #7 Chemical Feed Pump Tubes, Pack of 5 — STMCCP207-5, Stenner #7 Tube, Pack of 5, MCCP207$150.05
- —Stenner #7 Tube Assembly, 2-Pack — STUCCP207-2, Stenner #7 Tube Assm. (2-Pk), UCCP207$72.19
- —Stenner 1/4 inch Tube Accessory Kit for Chemical Pumps — STHPACK-2, Stenner 1/4 Accessory Kit, #2 Tube, HPACK-2$90.16
- —Stenner 1/4 inch ferrules, pack of 24 — STMCAK200-24, Stenner 1/4 Ferrules (24-Pk), MCAK200$36.82
- —Stenner 1/4" PVC Injection Fittings, 5-Pack — STMCAK300-5, Stenner 1/4 PVC Inj Ftg (5-Pk), MCAK300$63.35
- —Stenner 15 Gallon UV Gray Tank$342.27
- —Stenner 17 GPD Chemical Feed Pump with 110V power — 85MPHP17-110-B, Stenner 17 gpd Pmp w/1/4 Kit, 110v, 85MFH2A2SUAA$674.97
- —Stenner 17 GPD Chemical Feed Pump, 110V — 85MHP17-110, Stenner 17 gpd Hiprs Pmp w/1/4 Kit, 110v, 85MJH2A1STAA$925.42
- —Stenner 17 GPD Chemical Feed Pump, 110V — 85MHP17-110-B, Stenner 17 gpd Hiprs Pmp w/1/4 Kit, 110v, 85MJH2A2STAA$899.89
- —Stenner 17 GPD Chemical Feed Pump, 220V — 85MHP17-220, Stenner 17gpd Hiprs Pmp w/1/4 Kit, 220v, 85MJH2B1STAA$925.42
- —Stenner 3/4" Plastic Chemical Meter, 1PPG — STJLP0750-1PPG, Stenner Plastic Meter, 3/4", 1PPG, JLP0750-1PPG$386.08
- —Stenner Chemical Feed Pump Main Shaft, Series 45 & 85, UCFC5AD (STUCFC5AD)$75.16
- —Stenner Complete Hsng w/ #2 tube, QP252-1 (STUCTHC2D)$196.09
- —Stenner Conn Nut, 1/4 (10 Pk), UCAK100 (STUCAK100)$46.37
- —Stenner Duck Bill Check Vlv (5 Pk), MCCVDB0 (STMCCVDBO)$45.63
- —Stenner FP Series 30 GPD 115V chemical feed pump — FP30-115, Stenner FP Series 30 GPD 115v, E20PHH81S7$713.49
- —Stenner FP Series Tank or Wall Mt. Kit$35.33
- —Stenner Feed Rate Ctrl 45/85 Ser, W/Shft, FC5040D (STFC5080D)$406.45
- —Stenner Ferrule, 1/4 (10 Pk), UCAK200 (STUCAK200)$29.74
- —Stenner Grease 5.5 oz.Tube, MAGRE55 (STMAGCSGR)$99.88
- —Stenner Index Plate, UCFC5ID (STUCFC5ID)$55.98
- —Stenner Inj Ck Vlv,1/4, UCDBINJ (STUCDBINJ)$35.72
- —Stenner Ltch Kit for Pmp Hd, Pk.of 2, QP401-2 (STCP5LATCH)$34.01
- —Stenner Motor, 120 Volt$433.25
- —Stenner PVC Injection Fitting, 1/4, UCAK300 (STUCAK300)$32.37
- —Stenner Phenolic Gear Series 85 & 170, MP6NO80 (STMP6NO80)$49.71
- —Stenner Pmp Control Mod, 0.5-5.0 Seconds, PCM5$438.22
- —Stenner Pump Rain Roof, MP90000 (STMP90000)$39.90
- —Stenner Roller Assm., UC3ASYD (STUC3ASYD)$76.62
- —Stenner Sol Tnk, 15gal 25-1/4x20-1/2, STS15NC$422.62
- —Stenner Tube Hsng Cover W/Bushing, UCCP100 (STUCCP100)$61.27
- —Stenner Tube Hsng, UCCP400 (STUCCP400)$71.29
- —Stenner Variable Cam (2 Pk), UCFC5H0 (STUCFC5HO)$51.57
- —Stenner Weight & Strainr 1/4, ST114 (STUCMACWO)$50.50
- —Stenner chemical feed pump, 10 GPD, 100 PSI, 110V — 45MHP10-110, Stenner 100psi, 10gpd, w/1/4 Kit, 110v, 45MJH2A1S$925.42
Ordering notes for Stenner pumps
Match the pump model, the supply voltage and the tube size together. Tubes are consumables and are best replaced on a schedule; running one to failure usually damages the pump head as well. United States shipping is included in the price shown.
Getting the tube right
The tube is the part of a peristaltic pump that does the work, and it is deliberately the part designed to wear out. How long it lasts depends on what is being fed through it as much as on hours run, so a pump dosing chlorine will not follow the same replacement interval as one dosing a scale inhibitor. If output has fallen off gradually rather than stopped abruptly, the tube has almost certainly flattened rather than failed, and replacing it will restore the original feed rate without any adjustment to the pump itself.
Other parts indexes
- Fleck Valve Parts by Model Number
- Autotrol Valve Parts by Model Number
- C-Series Valve Parts by Part Number
- Pentek and Pentair Filter Parts by Model Number
- Tank and Air-Injection Parts by Model Number
- UV System Lamps and Sleeves by Model Number
Manuals for this equipment
Installation and programming manuals are available as free PDF downloads: All manuals.