If your water test report includes iron concentration readings
When your laboratory report shows iron levels, it typically lists the concentration in micrograms per liter (ug/L). For water sourced from the Harvey County aquifer, U.S. Geological Survey sampling from November to December 2011 found iron present in most samples taken from 20 wells. The median iron concentration was 3,275 ug/L with observed values ranging from 280 to 15,600 ug/L. This means many wells in the area contain detectable iron but levels vary widely. Your own water’s iron content can only be known through individual testing.
If iron levels vary seasonally or over multi-year periods
The USGS sampling in Harvey County was conducted over a one-month span in late 2011, reflecting a snapshot rather than a long-term trend. Seasonal changes or variations across multiple years may affect iron concentrations in groundwater due to factors like water table shifts or local aquifer chemistry changes. Without ongoing testing, how iron levels fluctuate for your household over time remains uncertain.
If your household plumbing is older or uses iron-containing materials
Iron detected in tap water can originate from both the source water and household plumbing. In Harvey County homes, corroding iron pipes or fittings can add rust particles that discolor water or stain fixtures independently of aquifer iron content. Differentiating source water iron from plumbing-related rust may require inspection and testing of both the water supply and household system.
If your iron concentrations relate to federal water standards
The USGS data for Harvey County does not report any iron level exceeding federal secondary maximum contaminant levels, which guide aesthetic-related issues like taste, odor, and staining. Detecting iron at the concentrations found is common and not considered a health violation. These measurements help guide treatment needs without implying water is unsafe.
If your household demand varies or you have a second or seasonal home
The volume of water your household uses daily and whether you treat multiple homes can impact the type of equipment appropriate for your iron and rust concerns. Larger households or multiple properties may require treatment options scalable to higher flow rates or intermittent use. The Pentair Orange Iron & Rust Stains Filter ships ready to configure for varying residential demands and can address iron staining at point of entry.
In summary, the iron concentrations discussed here come from extensive government sampling of wells in the Harvey County aquifer and do not predict your individual well’s iron amount. Testing your household water supply specifically is essential to determine treatment needs. The documented solution for iron and rust staining available from WaterSoftenerPlus is the Pentair Orange Iron & Rust Stains Filter, designed to reduce these issues effectively for residential use. For more details, see the U.S. Geological Survey groundwater data for Harvey County.
Where this information comes from
Source: USGS groundwater sampling. Sampled 2011-12-07. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.
On record: U.S. Geological Survey sampling of Iron in the aquifer (Harvey County): 26 results from 20 wells, median 3275.0 ug/L, range 280.0-15600.0 ug/L; none above any federal threshold
- ✓ 90-Day Money-BackNo restocking fees — return within 90 days.
- ✓ Manufacturer WarrantyGenuine Fleck · Pentair · VIQUA equipment.
- ✓ Free Expert SizingTalk to a specialist and buy the right system the first time.