Autotrol Fluoride Filter

$999.00

Buy Now

View full details

The groundwater supplying many homes in Kankakee County, Illinois, comes from aquifer 110QRNR, where water is drawn from depths generally between 12 and 23 feet. This aquifer is regularly sampled to understand its water quality, including fluoride levels, as it reaches household taps through local wells or other water sources.

Limited Sample Size and What It Means for Fluoride Data in Kankakee County

Between 2011 and 2021, the U.S. Geological Survey conducted 14 fluoride measurements at 7 different wells in this aquifer. Eleven of these measurements detected fluoride, while three were below the detection limit. While this data reflects the water conditions in this specific area and timeframe, the relatively small number of wells sampled means it provides a regional snapshot rather than a detailed profile of every local water source.

The Range of Fluoride Levels and How They Relate to Federal Guidelines

Measured fluoride concentrations ranged from 0.02 to 0.21 milligrams per liter, with a median value of 0.12 milligrams per liter. None of these levels exceeded federal standards for fluoride in drinking water. It is important to understand that these federal standards set a maximum level to protect public health. The detected concentrations in Kankakee County’s wells are well below these health-related limits. However, these findings do not describe the fluoride concentration in any individual household’s water, which would require direct testing of that water.

Water Use Points Where Fluoride Is Often Noticed First

In households where fluoride concentrations are of interest, the most impacted points typically include drinking water sources and appliances that use water frequently, such as refrigerators with water dispensers and ice makers. Fluoride does not usually affect water used for washing or irrigation in a noticeable way but can sometimes influence taste or mineral deposits on fixtures depending on concentration and water chemistry.

How the Autotrol Fluoride Filter Addresses Fluoride in Residential Water

The Autotrol Fluoride Filter uses a specialized system designed to reduce fluoride levels in household water effectively. It operates with media that adsorb fluoride ions, lowering the concentration before water reaches taps. This equipment ships ready to configure and connects directly to home water systems, providing a point-of-entry solution that can improve water quality for drinking and cooking purposes.

Potential Effects of Leaving Elevated Fluoride Untreated Over Time

While the fluoride levels sampled in this area do not exceed health-based limits, if fluoride concentrations were higher, long-term exposure could potentially impact dental health, particularly in children, or contribute to other mineral-related issues. Leaving fluoride untreated where it is a concern may lead to minor staining or changes in taste in water, as well as the gradual buildup of deposits in plumbing and appliances. These effects vary with the level of fluoride present and individual water chemistry.

What Kankakee County Water Data Does Not Tell You About Your Home

It is essential to recognize that the USGS fluoride data provides only regional information from a limited number of wells and does not measure the fluoride concentration in any single household’s water supply. To understand your own water’s fluoride level accurately, you would need to have your well or tap water professionally tested. This step is necessary before deciding on the type of water treatment equipment that best fits your household’s needs.

Where this information comes from

Source: USGS groundwater sampling. Sampled 2021-06-29. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.

On record: U.S. Geological Survey sampling of Fluoride in the 110QRNR aquifer (Kankakee County): 14 results from 7 wells, median 0.12 mg/L, range 0.02-0.21 mg/L; none above any federal threshold