If you notice your laundry colors fading faster than expected
Write down the visual clues: Is fading uniform or patchy? Are whites dull rather than bright? Are clothes feeling stiffer or rougher when dry? Note whether these changes worsen seasonally or correlate with changes in water use. Also record laundry habits like detergent type and washing temperature to help understand the full picture before considering treatment.
If you operate a commercial laundry or industrial facility instead of a household
In addition to household observations, you would consider volume of water treated daily and peak demand. You might also evaluate how water constituents impact fabric integrity under industrial cycles and the cost-effectiveness of various treatment technologies. Mechanical wear and fabric-specific fading tests may supplement visual inspection.
If you want to understand how treatment technology addresses faded laundry
Washington County groundwater sampling from aquifer 220NVJO shows minerals like calcium and magnesium—measured by hardness—are present in ranges from 135 to 621 mg/L with a median of 220 mg/L across 17 wells sampled at depths between 61 and 1140 feet. While none of these values exceeds federal thresholds, hardness minerals can interact with laundry detergents causing fabric roughness and color loss over time.
The Fleck Faded, Stiff Laundry System uses a controlled process to reduce hardness minerals in household water. This indirect approach improves how water interacts with fabrics during washing, helping preserve colors and softness by limiting mineral buildup on fibers without altering water safety or compliance.
If you want to distinguish faded laundry caused by minerals from effects due to detergent or washing technique
Mineral-caused fading tends to build gradually as minerals coat fabric and dull colors, often showing alongside stiffness or rough texture. Detergent issues might cause immediate color stripping or uneven fading, while improper washing temperatures usually affect shrinkage or dye bleeding but not stiffness. Observing these differences helps pinpoint whether water minerals or laundry habits cause fading.
If you want to compare Washington County groundwater mineral data to that of a neighboring county without overreading it
Washington County’s median hardness of 220 mg/L with a range up to 621 mg/L reflects moderate to relatively high mineral content typical for aquifer 220NVJO. Nearby counties might show different medians or ranges due to geological variation, but such differences do not imply individual wells perform identically. Instead, use county data as a guide to anticipate likely mineral impacts but confirm with your own water testing to decide treatment needs accurately.
For households in Washington County measuring water demand based on laundry load and hardness, the Fleck Faded, Stiff Laundry System ships ready to configure and provides a documented solution that reduces mineral effects impacting fabric life and appearance.
Where this information comes from
Source: USGS groundwater sampling. Sampled 2025-04-23. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.
On record: U.S. Geological Survey sampling of Hardness, Ca, Mg in the 220NVJO aquifer (Washington County): 77 results from 17 wells, median 220.0 mg/L, range 135.0-621.0 mg/L; none above any federal threshold
- ✓ 90-Day Money-BackNo restocking fees — return within 90 days.
- ✓ Manufacturer WarrantyGenuine Fleck · Pentair · VIQUA equipment.
- ✓ Free Expert SizingTalk to a specialist and buy the right system the first time.