What Does a Laboratory Test Report for Arsenic Usually Show?
When you receive a laboratory analysis for arsenic in water, the report typically lists the measured concentration in micrograms per liter (µg/L), sometimes referred to as parts per billion. For Texas County, Oklahoma, data collected through the U.S. Geological Survey characterize arsenic levels in wells within the 121OGLL aquifer. This report does not apply directly to your individual well but gives insight into regional water quality. The median arsenic concentration recorded was 1.525 µg/L, with values ranging from 0.94 to 5.6 µg/L across four samples taken from three wells between 2010 and 2021. It is important to note that none of these samples exceeded federal arsenic thresholds for drinking water.
How Many Samples and Wells Stand Behind These Figures, and What Does a Small Sample Size Mean?
The arsenic information comes from just four samples collected from three separate wells, each between 188 and 300 feet in depth. This relatively small sample size means the findings provide an initial understanding rather than a comprehensive regional assessment. Variability can exist between wells and over time, so these figures serve as a regional reference, not a definitive reflection of any specific household's water.
Which Household Signs Might Suggest Arsenic Is Present, and Which Are Unrelated?
Arsenic is a naturally occurring element that does not cause immediate taste or odor changes at the concentrations found in Texas County. Therefore, typical household water complaints like strange tastes, smells, staining, or drying of skin do not reliably indicate arsenic presence. Detecting arsenic requires laboratory testing; symptom absence does not guarantee its absence. Conversely, certain health concerns linked to long-term exposure to elevated arsenic levels should prompt testing but cannot be determined by sensory observation or home water behavior alone.
What Should You Record Before Considering Advice on Arsenic Treatment Options?
Before evaluating equipment for arsenic reduction, it’s crucial to have a current, laboratory-verified arsenic test result from your own water source. Note the exact arsenic concentration, test date, and sample location. Additionally, document water usage patterns and household size to understand daily water demands. Such details help determine the appropriate type and capacity of treatment equipment fitting your needs.
How Do Variations Like a Large Household, a Second Home, or a Seasonal Property Influence Arsenic Treatment Needs?
Larger households consume more water, which can necessitate equipment with greater capacity or more frequent media replacement. A second home or seasonal property might require equipment that maintains effectiveness despite intermittent use. Planning treatment around these factors will ensure consistent arsenic reduction and system longevity without unnecessary oversizing or maintenance burdens.
Does Sample Depth or Well Type Affect What You Should Expect About Arsenic Levels?
Arsenic concentrations can vary based on well depth and aquifer characteristics. The samples from Texas County were from wells 188 to 300 feet deep, reflecting deeper aquifer conditions. Shallow wells or surface water sources might have different arsenic profiles. Understanding your well’s depth and water source type will help contextualize test results and guide treatment decisions.
Summary of Arsenic Occurrence Data and Next Steps
The arsenic measurements reflect data from three wells sampled four times over eleven years in the 121OGLL aquifer of Texas County, Oklahoma. All results were below federal arsenic thresholds, indicating no recorded exceedances in the sampled wells. While this regional data offers a useful baseline, individual household testing remains essential for accurate assessment. If arsenic is detected at levels requiring reduction, the Autotrol Arsenic Filter ships ready to configure and serves as a documented technology to address this constituent effectively. For detailed data, consult the U.S. Geological Survey’s monitoring location for Texas County groundwater.
Where this information comes from
Source: USGS groundwater sampling. Sampled 2021-04-12. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.
On record: U.S. Geological Survey sampling of Arsenic in the 121OGLL aquifer (Texas County): 4 results from 3 wells, median 1.525 ug/L, range 0.94-5.6 ug/L; none above any federal threshold
- ✓ 90-Day Money-BackNo restocking fees — return within 90 days.
- ✓ Manufacturer WarrantyGenuine Fleck · Pentair · VIQUA equipment.
- ✓ Free Expert SizingTalk to a specialist and buy the right system the first time.