Is your current water treatment system no longer controlling radon effectively? Many Kent County residents with aquifer 125RCCS water supplies experience this challenge despite past efforts. Understanding area radon data and treatment expectations can guide choosing the next step.
Why Aesthetic Secondary Standards Differ from Health-Based Limits for Radon
Unlike color or taste-related water issues, radon is a radioactive gas naturally present in groundwater that can pose potential health concerns depending on concentration. Aesthetic secondary standards primarily address taste and staining, which do not apply to radon. Federal health-based guidelines specifically govern radon levels to protect drinking water safety. The standards for radon focus on limiting exposure risks rather than sensory qualities.
How Treated Water Quality Changes After Using the Documented Technology
When active radon removal technology such as the Pentair Radon in Water Filter is engaged, the water delivered to household fixtures shows a significant reduction in radon concentration. This process decreases radon gas dissolved in water before it reaches taps and appliances, lowering radon-related risks during water use. Treated water’s radiological quality improves without altering other water characteristics.
Interpreting Kent County’s Radon-222 Range Compared to Federal Standards
The U.S. Geological Survey collected radon-222 data from 12 wells in Kent County’s 125RCCS aquifer, with sample depths ranging from 180 to 380 feet. Results ranged from 126.0 to 640.0 picocuries per liter (pCi/L), with a median value of 400.0 pCi/L. None of these measurements exceeded any federal regulatory thresholds for radon in drinking water. This dataset reflects broad area conditions but does not indicate individual well results.
Clarifying the Terms 'Detected,' 'Median,' and 'Range' in This Data Set
- Detected: Radon-222 was found in all 12 sampled wells; no samples were below the reporting limit.
- Median: The middle value of the 12 results was 400.0 pCi/L, meaning half the wells had values above and half below.
- Range: The lowest recorded result was 126.0 pCi/L and the highest was 640.0 pCi/L, showing variability across the sampled wells.
These measurements are area indicators and do not reflect any single household water supply. Only a certified laboratory analysis of your own water can determine your specific radon level and inform treatment needs.
Which Household Fixtures and Water Uses Are Most Affected by Radon
Radon gas dissolves in water and can release into air during water use. Fixtures with aeration such as showers and faucets increase this release, potentially raising indoor air radon levels. Appliances using water without aeration, such as dishwashers or washing machines, tend to retain dissolved radon with less airborne release. Treating water for radon reduces exposure risks primarily at points where water disperses as vapor or spray.
Given your current equipment no longer meets the radon removal challenge, consider the Pentair Radon in Water Filter. It ships ready to configure and is designed to handle household demand corresponding to your measured water use, providing effective radon reduction for your home's water supply.
Where this information comes from
Source: USGS groundwater sampling. Sampled 2015-08-20. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.
On record: U.S. Geological Survey sampling of Radon-222 in the 125RCCS aquifer (Kent County): 12 results from 12 wells, median 400.0 pCi/L, range 126.0-640.0 pCi/L; none above any federal threshold
- ✓ 90-Day Money-BackNo restocking fees — return within 90 days.
- ✓ Manufacturer WarrantyGenuine Fleck · Pentair · VIQUA equipment.
- ✓ Free Expert SizingTalk to a specialist and buy the right system the first time.