If Your Test Report Lists Radon Levels Near the Area Median
A certified laboratory report for radon in water will typically show concentrations in picocuries per liter (pCi/L). In Richmond County’s aquifer 125DBLNL, U.S. Geological Survey sampling from three wells in 2021–2025 found radon levels ranging from 162.0 to 184.0 pCi/L, with a median of 170.0 pCi/L. None of these results exceeded any federal standard. This indicates typical radon levels in this area’s groundwater but does not predict the concentration in your specific well or tap water. Starting with this information helps frame expectations but does not replace individual testing.
If You Want to Know How These Radon Levels Compare to Federal Standards
The Environmental Protection Agency has a proposed maximum contaminant level for radon in water, but this is not yet a legally enforceable limit. The samples taken in Richmond County aquifer 125DBLNL all fell below any federal thresholds under consideration. It is important to understand that detecting radon at these levels does not indicate a violation or unsafe water by legal definitions. The numbers mainly inform aesthetic and precautionary considerations. Interpreting the range reveals typical variability in the aquifer and helps determine the need for further testing or treatment.
If You Are a Commercial or Industrial Operator Considering Radon Questions Beyond Residential Needs
Commercial or industrial water users have additional concerns such as larger volumes of water treated, regulatory compliance, and potential liability. These users may consider the same area sampling data but require more frequent or detailed testing of their own water supplies. The scale of water use also influences technology choice and configuration. Unlike residential households, commercial operations may need to factor in system redundancy and maintenance schedules to reliably control radon levels.
If You Understand How Treated Water Will Differ After Using Fleck Radon in Water Filter
Once water passes through the Fleck Radon in Water Filter, radon concentrations can be significantly reduced. This system uses reliable technology to address radon dissolved in water, improving the quality of water delivered at your tap. Treated water typically exhibits lower radon levels, decreasing radon-related exposure from water use such as showering, cooking, and drinking. The system ships ready to configure, suitable for residential settings like yours.
If You Know Which Fixtures, Appliances, or Processes Receive Treated Water First
The Fleck system connects to your home's plumbing upstream of faucets and water-using appliances. This means treated water reaches drinking water taps, showers, and kitchen appliances first, reducing radon exposure during consumption and daily use. Water going to laundry or irrigation may or may not pass through the treatment, depending on plumbing setup. Prioritizing points of use for radon reduction optimizes your household’s health-related benefits.
If You Are Learning to Read a Certified Laboratory Radon Test Report for Your Water
A test report for radon in water shows radon concentration in pCi/L, the location of sampling, date of analysis, and sometimes notes about detection limits. If the report includes values like those found in Richmond County aquifer 125DBLNL—between 162.0 and 184.0 pCi/L—it reflects typical area levels but should not be assumed to represent your well exactly. Understanding the report’s structure and the meaning of each figure helps in making informed decisions about treatment needs and selection.
Ultimately, if your measured radon concentration aligns with or exceeds the typical Richmond County range, the Fleck Radon in Water Filter offers a documented solution designed to reduce radon safely and effectively. It ships ready to configure for your home water system, providing a targeted approach based on your own test results.
Where this information comes from
Source: USGS groundwater sampling. Sampled 2025-07-07. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.
On record: U.S. Geological Survey sampling of Radon-222 in the 125DBLNL aquifer (Richmond County): 3 results from 1 wells, median 170.0 pCi/L, range 162.0-184.0 pCi/L; none above any federal threshold
- ✓ 90-Day Money-BackNo restocking fees — return within 90 days.
- ✓ Manufacturer WarrantyGenuine Fleck · Pentair · VIQUA equipment.
- ✓ Free Expert SizingTalk to a specialist and buy the right system the first time.