Shop the WSP 110,000 Grain Mineral Tank - Twin-Tank — free US shipping
Why This System Fits
This system is specifically engineered for areas with varying water quality issues, offering an effective solution that many single-tank systems may lack. With its dual-tank configuration, it provides continuous water treatment, ensuring that your household needs are met without interruption. This makes it a superior choice for those seeking reliability and performance in their water treatment solutions.
Why This System Fits
This system is ideal for addressing common water problems like hardness and mineral buildup, prevalent in many local sources. The dual-tank setup allows for a seamless transition between tanks, which enhances the overall effectiveness in softening water. Its design accommodates the specific water chemistry found in this region, making it a tailored solution for your needs.
Why This System Fits
This system is designed to consistently deliver softened water, ensuring that your household enjoys optimal water quality for drinking, cooking, and cleaning. With its efficient operation, you can count on this system to maintain your water's clarity and taste, while also prolonging the life of your appliances. Enjoy peace of mind knowing that your water treatment needs are met effortlessly.
1. Shut Off Water & Prepare Plumbing
Begin by turning off your main water supply. Open a faucet downstream to drain remaining water from the pipes. Cut into the main line where you plan to install the softener, leaving enough space for the twin tanks and control valve.
2. Connect the Bypass
Attach the bypass valve or loop to the system’s inlet and outlet ports. This allows you to isolate the softener for maintenance without disrupting your entire water supply.
Why This System Fits
Many alternatives may struggle to maintain consistent water quality during peak usage times, but this system ensures that your family has access to treated water whenever needed. Its efficient design and capacity to handle varying water conditions make it a standout choice for residents in this area looking for dependable water treatment.
4. Set Up Drain & Waste Lines
Attach a drain line to the softener’s drain port, ensuring it is vented outside or into a drain with an air gap. Secure the drain line to prevent movement or leaks.
5. Connect the System to Power
Plug the control system into a grounded electrical outlet, following all safety guidelines. Ensure the control box is protected from moisture and physical damage.
6. Turn On Water Supply & Flush
Open your main water supply and slowly turn on the bypass to fill the system. Check all fittings for leaks, tightening as necessary. Run water through the system to flush out any debris introduced during installation.
System Setup & Programming
1. Initial System Flush
Initially, run water through the system for several minutes to thoroughly flush out the resin tanks and piping. This helps ensure no residual installation debris remains.
2. Set Regeneration Parameters
Configure your system’s metered control valveto match your household water usage patterns. The Fleck 9100 control regenerates only when needed, based on actual consumption, optimizing salt and water efficiency. Adjust the parameters following the manufacturer's instructions, typically involving setting cycle volume and capacity thresholds.
3. Load the Resin Tanks
Fill the resin tanks with high-capacity cation resin, if not pre-filled. Use appropriate residential softening salt, filling the brine well as per the system’s specifications.
4. Final Checks & Testing
Once programmed, run water through the system to verify softening performance. Check for leaks and confirm that the system transitions smoothly between tanks during regeneration cycles.
Operational Tips for Longevity and Efficiency
- Maintain proper salt levels in the brine well to ensure effective regeneration.
- Perform periodic inspections for leaks, corrosion, or blockages.
- Adjust regeneration settings if your household’s water usage changes significantly.
- Use only recommended salt and resin products to prolong system life.
By following these installation and setup procedures, your Fleck 9100 twin-tank water softener will provide continuous, soft water that protects your plumbing, appliances, and skin while delivering significant operational savings. Proper maintenance and configuration maximize the system's efficiency, ensuring you enjoy the benefits of softened water in your daily life for years to come.
A realistic maintenance schedule
Maintaining your WSP 110,000 Grain Mineral Tank - Twin-Tank system is crucial for optimal performance. Monthly, check the salt level in the brine tank and refill as necessary. Inspect and clean the brine tank every six months to prevent salt buildup and residues. Additionally, monitor the system's pressure gauge for any irregularities, adjusting your household water pressure as needed.
Annually, consider scheduling a professional service to inspect and clean the resin tanks and control valve. This can help identify any potential issues early, ensuring the system remains efficient. Water quality tests can be conducted yearly to check for hardness levels, ensuring the system is functioning properly.
