Fleck Radon in Water Filter

Buy Now

View full details

Keeping Your Radon Treatment Effective Over Time

The Fleck Radon in Water Filter is designed for ongoing use to maintain lower radon levels in household water sourced from wells or local systems. Its maintenance rhythm generally involves periodic checks of system components and routine replenishment of filter media or regeneration materials as recommended by product documentation. Households can expect to manage the system’s upkeep on a schedule aligned with water usage and water quality conditions, typically guided by diagnostic indicators included with the product.

How the Fleck System Reduces Radon in Water

The Fleck approach uses a physical filtration and adsorption process to lower radon concentrations in your water supply. By passing water through specialized media within the system, radon gas dissolved in the water is captured or allowed to decay before reaching household taps. This technology does not add chemicals but relies on media capacity and treatment cycles to reduce radon to levels that contribute less to indoor air and drinking water exposure. It ships ready to configure for household water systems drawing from sources like aquifer 211MLRW.

Radon Origin in Salem County’s Aquifer 211MLRW

Radon-222 naturally originates from the decay of uranium in underground rock formations feeding aquifer 211MLRW in Salem County. As groundwater moves through these mineral-rich layers, it can dissolve radon gas, which remains dissolved until released in water usage at home. U.S. Geological Survey sampling of two wells in this aquifer area found radon detected in all four results, ranging from 530.0 to 840.0 pCi/L with a median of 685.0 pCi/L. These wells were between 157 and 171 feet deep. While radon was present, none of the measured values exceeded any federal threshold, indicating typical regional levels rather than an outlier condition.

The Effect of Plumbing Materials and System Age on Radon Occurrence

Plumbing materials and the age of a household water system do not influence radon concentrations originating in source water but can affect how radon behaves after entering the home. Radon is a gas and can be released from water into indoor air through faucets, showers, and other water uses. Older plumbing with leaks or increased aeration points may facilitate this gas transfer differently than newer systems. However, plumbing does not create or increase radon levels; it only changes exposure pathways.

Additional Considerations for Commercial or Industrial Water Users

Commercial and industrial operators often face larger volumes and more complex water distribution systems compared to households. They may need to consider radon removal at multiple points or combined systems, continuous monitoring, and regulatory compliance specific to their water use and discharge regulations. Household treatment focuses primarily on point-of-entry solutions, whereas commercial scale requires integration with facility water management plans and possibly additional radon measurement protocols.

Interpreting Salem County Radon Results Against Federal Guidelines

The federal standards include recommended levels for radon in drinking water to manage health risks. The Salem County aquifer 211MLRW samples show radon levels detected consistently but all results fall below any federal action level. This means that while radon presence is confirmed regionally, these measurements alone do not qualify as a safety violation or urgent health hazard. They reflect regional baseline conditions from typical groundwater drawn at moderate depth.

Next Steps: Confirming Radon Levels in Your Household Water

Because regional measurements cannot define your specific household water quality, the single most important test to order is a radon water analysis for your own well or water source. Only this test can establish your home’s actual radon concentration. A confirmed elevated result would support using a Fleck Radon in Water Filter to reduce radon in your water supply. The Fleck system ships ready to configure and can be integrated into your household water treatment approach for ongoing radon reduction.

Where this information comes from

Source: USGS groundwater sampling. Sampled 2024-06-17. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.

On record: U.S. Geological Survey sampling of Radon-222 in the 211MLRW aquifer (Salem County): 4 results from 2 wells, median 685.0 pCi/L, range 530.0-840.0 pCi/L; none above any federal threshold