Fleck Radon in Water Filter

Buy Now

View full details

Government-Sampled Radon Levels in Medina County Groundwater

The U.S. Geological Survey collected radon-222 data from seven wells in Medina County’s aquifer 218EDRDA during early 2017. Each of these wells, ranging in depth from 715 to 2550 feet, showed detectable radon, with values between 7.0 and 69.0 pCi/L. The median across samples was 7.0 pCi/L. These figures reflect regional groundwater conditions only, not the concentration in any specific household water source.

Long-Term Impacts of Untreated Radon in Household Water

Radon is a naturally occurring radioactive gas that can emanate from groundwater and enter household water supplies. When water containing radon is used for showering, cooking, or cleaning, radon gas may be released into indoor air. Over extended periods, elevated indoor radon levels can contribute to increased exposure risks. While ingestion of radon in water poses much lower risks compared to inhaled radon, households with high radon levels in water may see additional indoor air contributions. Without treatment, radon presence can remain a persistent source of exposure over time.

Influence of Plumbing Materials and System Age on Radon Exposure

Plumbing characteristics do not create radon but can influence how radon behaves once it enters the household water system. Older plumbing may have more joints and fixtures where radon can more easily off-gas into indoor air. Materials like certain metals or plastics do not significantly alter radon concentration in water, but system design affecting water agitation or mixing can impact gas release rates. The presence and age of plumbing should be considered when assessing radon exposure pathways inside the home, separate from the water source itself.

Recognizing Household Symptoms Related and Unrelated to Radon in Water

Radon is odorless, tasteless, and invisible in water, so direct sensory detection is not possible. Symptoms such as unusual tastes or smells point to other water quality issues. Health symptoms solely attributable to waterborne radon are not typically observable by residents, as radon exposure effects develop subtly over long periods. If radon is suspected based on area data, testing the home’s water and indoor air radon levels is the only way to confirm its presence and concentrations.

How a Fleck Radon in Water Filter Addresses Radon in Household Water

The Fleck Radon in Water Filter system uses targeted technology designed to reduce radon concentrations in residential water supplies. It works by facilitating the removal or neutralization of radon gas before water reaches household taps, lowering the potential for radon release into indoor air. This system ships ready to configure for connection to household water lines, providing an effective option for reducing radon-related exposure concerns.

Changes at the Tap After Using the Fleck Radon in Water Filter

Once the Fleck Radon in Water Filter is in operation, household water will contain lower radon levels, decreasing radon off-gassing into indoor air during routine water use. There are no notable changes in water taste, odor, or appearance directly resulting from radon reduction. The filtration system focuses solely on radon and does not affect other water quality parameters.

Additional Considerations for Commercial and Industrial Water Users

Commercial or industrial operators should consider water volume demands and potential differences in water use patterns impacting radon exposure risks. Larger-scale water systems may require assessment of radon removal capacity and system scalability. These factors are beyond the scope of typical household radon concerns but are essential for comprehensive risk management in non-residential settings.

What Area Data Does Not Establish for Your Home

It is important not to assume that because radon was detected in Medina County aquifer samples, your household well or municipal supply has the same levels. Government area data reflects regional groundwater conditions but cannot substitute for specific testing of your home’s water. Only direct measurement of your water source can determine your actual radon concentration and the need for treatment.

Where this information comes from

Source: USGS groundwater sampling. Sampled 2017-03-28. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.

On record: U.S. Geological Survey sampling of Radon-222 in the 218EDRDA aquifer (Medina County): 7 results from 7 wells, median 7.0 pCi/L, range -20.0-69.0 pCi/L; none above any federal threshold