48 Fiberglass Tanks - Twin Unit Skid

Buy Now

View full details

Which fixtures, appliances or processes are affected first and why?

In commercial buildings, water-related dry skin issues commonly emerge in areas with frequent water contact, such as restrooms, locker rooms, and shower facilities. These fixtures expose occupants to the water quality throughout the entire building's supply. When water has elevated levels of minerals like calcium and magnesium, it can influence skin moisture and texture over time. Because the entire water system supplies multiple outlets, the problem is widespread rather than localized.

How to judge treatment capacity against the facility's daily water demand

For whole-building water treatment to address dry skin concerns, it is essential to match the treatment system's capacity with the volume of water used daily by the commercial property. This includes accounting for peak usage periods and total flow rates across all fixtures. Evaluating the facility's water consumption data allows for selecting equipment that can consistently handle the demand without interruption or underperformance.

What should be noted before seeking treatment recommendations?

Before pursuing any water treatment options, document the facility's daily water usage rates, the number of outlets served, and any existing water quality reports. Obtain or arrange for a certified laboratory analysis of the building's water supply focusing on calcium and magnesium levels, which contribute to water mineral content. This information will guide the selection of an appropriately sized water treatment skid and ensure the solution is tailored to the building’s needs.

What do 'detected', 'median', and 'range' mean in the sampling record for this area?

The U.S. Geological Survey sampled groundwater from wells in CT's aquifer 110AVTN, specifically in FIPS area 180. In their records, 'detected' indicates the measurable presence of calcium and magnesium, with all four samples showing these constituents. The 'median' value of 162.5 mg/L represents the middle point of measurements for hardness from these samples, while the 'range' of 140.0 to 188.0 mg/L shows the variability found between different wells and time points. Importantly, none of these results exceed federal safety thresholds, indicating that these mineral levels are common in this aquifer but not harmful by regulatory standards.

What does a certified laboratory test report, and how should it be read?

A certified laboratory test for calcium and magnesium concentration will provide specific measurements of these minerals in your building’s water supply. The report typically includes the measured concentration, units (usually mg/L), and comparison to regulatory or aesthetic guidelines. Understanding these values in context helps determine whether mineral content might affect skin feel or water handling properties. Keep in mind, only testing your property’s water reveals its exact profile and informs targeted treatment decisions.

The U.S. Geological Survey sampling focuses on general aquifer characteristics, not individual water supplies. For exact water composition at your commercial building in CT’s aquifer 110AVTN area (FIPS 180), consider laboratory testing. The 48 Fiberglass Tanks - Twin Unit Skid commercial system skid ships ready to configure and is designed to address mineral-related water quality issues on a whole-building scale, accommodating the flow and usage of commercial properties.

Source for water quality data: U.S. Geological Survey groundwater sampling, FIPS 180, aquifer 110AVTN.

Where this information comes from

Source: USGS groundwater sampling. Sampled 2011-02-20. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.

On record: U.S. Geological Survey sampling of Hardness, Ca, Mg in the 110AVTN aquifer (FIPS 180): 4 results from 1 wells, median 162.5 mg/L, range 140.0-188.0 mg/L; none above any federal threshold