Plumbing Material and Age: Their Influence Beyond Source Water
Even in areas like Anoka County, MN, where groundwater from aquifer 112GSSG is sampled, the corrosive nature of water a household experiences can stem as much from plumbing characteristics as from water chemistry. Older pipes or certain materials may corrode more readily, accelerating damage regardless of measured source water details. This means that the water arriving at your taps may interact with your plumbing in ways not reflected by generalized regional water data. Household plumbing's role is crucial in the severity and type of corrosion observed.
Commercial Versus Household: Additional Concerns for Larger Operations
Commercial and industrial water users in Anoka County face considerations that differ from those of residential users. Larger scale water use requires monitoring multiple chemical parameters, flow rates, and impacts on equipment and processes that household water needs do not. These operators must ask questions about water chemistry changes over time and how corrosivity might impact maintenance schedules or product quality. In contrast, a household focus is primarily on water clarity, taste, and pipe longevity within domestic plumbing systems.
Distinguishing Corrosive Water from Similar Issues
Corrosive water is often mistaken for water that simply contains high mineral content or staining elements. However, corrosive water is characterized by its ability to react chemically with piping and fixtures, potentially causing metal leaching and premature pipe wear. This differs from hardness or aesthetic issues where water may have mineral buildup but not actively damage plumbing materials. Understanding this distinction clarifies why certain treatments focus not on mineral removal but on neutralizing corrosive properties.
Interpreting Certified Laboratory Test Results for Chloride
For residents concerned about corrosive water, a certified laboratory test analyzing chloride levels in your specific well or tap water provides key insight. Chloride, a contributor to corrosivity, is measured in milligrams per liter (mg/L) and reported as precise results. Regional data from Anoka County’s aquifer 112GSSG shows chloride detected in all 11 sampling events, ranging from 8.34 to 692.0 mg/L, with a median of 31.9 mg/L. Note that chloride presence alone does not indicate water safety issues but helps assess corrosivity influence. Test results come with qualitative interpretation to guide action, especially if chloride approaches or exceeds aesthetic thresholds that affect taste or staining.
Effect on Tap Water After Using the Autotrol Corrosive Water Damaging Pipes Filter
Employing the Autotrol Corrosive Water Damaging Pipes Filter in your home configures water treatment to mitigate the effects of corrosive water. After treatment, water passing through this system shows reduced corrosive interaction with plumbing materials, helping preserve pipes and fixtures. Taste and appearance improvements may also be noticed, as the filter targets chemical factors contributing to corrosivity rather than removing all minerals. This approach maintains water’s balance while addressing the underlying issue identified by area chloride data and your own test results.
The data discussed derives from U.S. Geological Survey groundwater sampling in Anoka County targeting aquifer 112GSSG, covering nine wells sampled between 2011 and 2016. This regional measurement highlights what can be expected in the area but does not replace testing of your own water source. For more detailed information, the USGS monitoring site provides comprehensive data for this aquifer and region.
Where this information comes from
Source: USGS groundwater sampling. Sampled 2016-08-30. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.
On record: U.S. Geological Survey sampling of Chloride in the 112GSSG aquifer (Anoka County): 11 results from 9 wells, median 31.9 mg/L, range 8.34-692.0 mg/L; 1 above an AESTHETIC secondary standard only (secondary standard 250.0 mg/L (aesthetic)) - not a health finding
- ✓ 90-Day Money-BackNo restocking fees — return within 90 days.
- ✓ Manufacturer WarrantyGenuine Fleck · Pentair · VIQUA equipment.
- ✓ Free Expert SizingTalk to a specialist and buy the right system the first time.