Autotrol Complete Well System

Buy Now

View full details

If Your Equipment Works But Can’t Keep Up, You May Face a Complete Well Issue

A common misunderstanding is that when existing water treatment equipment struggles, it must be due to water contamination or poor system condition. However, in Jerome County's aquifer 110SKRV, the challenge often lies in water quantity and treatment capacity rather than in health-related contaminants. The U.S. Geological Survey’s data shows median total dissolved solids (TDS) at 258.5 mg/L with a range from 0.25 to 513.0 mg/L. This constituent impacts taste and staining but does not imply unsafe water or violations. When your equipment cannot keep pace, it could be a complete well condition, where available water volume or the treatment capacity needs reassessment.

If You Are Considering Equipment Maintenance, Know the Simple Rhythm

The Autotrol Complete Well System ships ready to configure for household use and features a grain capacity of 32,000. Routine upkeep involves monitoring capacity use and periodic replenishment of conditioning agents to maintain effective treatment performance. Unlike smaller units that may require frequent attention, this system’s high capacity supports longer intervals between service activities, fitting a household coping with expanding water needs or fluctuating water quality within typical regional ranges.

If Your Household Sees These Water Symptoms, It May Indicate Capacity Limits; If Not, Look Elsewhere

The typical signs of a complete well condition include your current treatment setup no longer adequately supporting your daily water demands. Indicators might be slower water flow through treatment, increased frequency of system regeneration or recharge cycles, or visible effects like staining or taste changes influenced by higher dissolved solids. Conversely, if you notice health-related symptoms or water safety concerns, those fall outside this issue and require separate water quality testing by certified laboratories specific to your well.

If You Know How Total Dissolved Solids Enter Groundwater Here, You Understand Why Treatment Capacity Matters

In Jerome County’s aquifer 110SKRV, total dissolved solids primarily come from natural mineral deposits encountered at depths between 140 and 563 feet, as reflected in USGS well samples. These minerals affect aesthetic water quality rather than safety. The dissolved solids accumulate in groundwater naturally over time due to geological formations. Such conditions require treatment systems that can handle the volume and mineral content efficiently, especially in households where water usage and well drawdown rates increase.

If You Are a Commercial Operator, You Will Consider Additional Factors Unlike Households

While household water needs focus on steady daily volume and aesthetic quality, commercial or industrial operations must consider peak flow demands, regulatory monitoring, and system scalability. They often evaluate water treatment not only for dissolved solids but also for process compatibility and equipment longevity under variable load conditions. These questions extend beyond what a complete well household must manage but highlight the importance of selecting a treatment system with sufficient capacity such as the Autotrol Complete Well System.

What You Shouldn’t Conclude From Jerome County Area Data Alone

Area-wide groundwater sampling informs about typical constituents like total dissolved solids but cannot define the exact conditions of your private well water. Detected levels of dissolved solids represent measured concentrations from multiple wells, not a direct report on your household water. Since only one sample exceeded the secondary aesthetic standard for TDS—which relates to taste and staining, not health—there is no implication your water is unsafe or violates regulations. To understand your well’s specific needs, testing by certified labs is essential. The Autotrol Complete Well System addresses capacity challenges common in households facing increasing demand or mineral load in the region’s aquifer.

Where this information comes from

Source: USGS groundwater sampling. Sampled 2019-06-20. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.

On record: U.S. Geological Survey sampling of Total dissolved solids in the 110SKRV aquifer (Jerome County): 98 results from 25 wells, median 258.5 mg/L, range 0.25-513.0 mg/L; 1 above an AESTHETIC secondary standard only (secondary standard 500.0 mg/L (aesthetic)) - not a health finding