Plumbing Material and Age: A Separate Factor from Source Water
Older plumbing can impart taste or staining unrelated to groundwater
Materials like galvanized steel or copper piping may interact with water, causing discoloration or metallic taste. These effects come from plumbing condition, not the well's source water itself.
Pipe corrosion is independent of dissolved solids levels measured in aquifers
Corrosion affects plumbing longevity but does not indicate groundwater dissolved solids content.
Entry of Total Dissolved Solids into Groundwater in Elmore County
Natural mineral content varies with depth and geology in aquifer 112BRUN
Groundwater samples documented by the USGS from 9 wells in Elmore County's 112BRUN aquifer show total dissolved solids (TDS) ranging widely from 0.14 to 979.0 mg/L. This reflects local geology and not a uniform level across all wells.
TDS arises from organic and inorganic dissolved minerals in aquifer formations
Dissolved solids include salts and minerals naturally present, influencing taste and potential staining but not necessarily posing health risks.
Distinguishing Public-System Records from Private Well Testing
Public data reflects multiple wells, not your individual well's condition
The USGS data compiles 96 samples from different wells over four years. It indicates general aquifer qualities but cannot specify your own water's exact composition without testing.
Private well testing is necessary to determine your specific water characteristics
Only a certified laboratory analysis of your well water can provide precise dissolved solids and other constituent levels unique to your location and system.
Separating Complete Well Water Issues from Related Problems
Complete well water concerns can be confused with plumbing-derived taste or staining
Since plumbing materials influence water appearance and taste, these effects should not be mistaken for groundwater quality issues detected by regional sampling.
Other water aesthetic issues may arise from sources other than total dissolved solids
Factors such as iron or manganese presence cause staining but are unrelated to TDS levels discussed here.
Interpreting Certified Laboratory Reports for Total Dissolved Solids
Laboratory results state concentration in mg/L or ppm for your specific water sample
These figures show the exact total dissolved solids present in your water at the time of sampling.
Values below or above the secondary standard affect taste and staining potential, not safety
The EPA secondary standard for TDS is 500 mg/L, an aesthetic threshold. Samples above this indicate possible taste or staining issues, not a health violation.
How the Fleck Complete Well System Addresses Total Dissolved Solids
Equipped to handle up to 32,000 grains capacity for dissolved solids control
This system uses proven filtration and conditioning methods to reduce TDS-related taste and staining concerns documented by area data.
Ships ready to configure for residential water treatment needs
Designed to improve water aesthetics by targeting dissolved solids, it supports clearer, better-tasting water derived from private wells.
What Not to Conclude From Regional Aquifer Data
Area sampling results do not specify your well's water quality
While the USGS data provides valuable context about Elmore County groundwater, only your own water test can confirm your well’s dissolved solids levels.
Detection within the range does not necessarily mean a problem exists in your home
Many samples exceeded aesthetic thresholds without health implications. These findings should not be equated with safety or violation concerns.
Where this information comes from
Source: USGS groundwater sampling. Sampled 2014-04-25. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.
On record: U.S. Geological Survey sampling of Total dissolved solids in the 112BRUN aquifer (Elmore County): 96 results from 9 wells, median 53.165 mg/L, range 0.14-979.0 mg/L; 17 above an AESTHETIC secondary standard only (secondary standard 500.0 mg/L (aesthetic)) - not a health finding
- ✓ 90-Day Money-BackNo restocking fees — return within 90 days.
- ✓ Manufacturer WarrantyGenuine Fleck · Pentair · VIQUA equipment.
- ✓ Free Expert SizingTalk to a specialist and buy the right system the first time.