Pentair Arsenic Filter

Buy Now

View full details

Understanding Local Arsenic Data for Your Home

Regional water-quality records provide insights into what is measured in groundwater sources like those in Crawford County, AR, specifically the aquifer labeled 110ALVM. These results come from systematic sampling of ten wells in the area but do not reflect an individual well's specific arsenic levels.

Data from the U.S. Geological Survey sampled these wells over two days in July 2010. Every sample detected arsenic, with concentrations ranging from 0.38 to 6.8 micrograms per liter (µg/L), and the median level was 1.265 µg/L. This range and median help frame expectations but cannot substitute for testing your own water.

Checklist: Interpreting Arsenic Concentrations and Regulatory Context

Arsenic Detection vs. Federal Standards

• All sampled wells showed arsenic present but none exceeded federal regulatory thresholds for arsenic in drinking water.
• Detection means arsenic was measured, not that the water is unsafe or violates any legal limit.
• Federal standards primarily protect health and are not based on presence alone but on exceeding a specific concentration.

What Regional Data Does Not Indicate

• Regional median and range are not direct measurements of your private well’s arsenic level.
• This data cannot determine your household’s exposure or water safety without your well’s actual water test.

Checklist: Maintenance Rhythm for Arsenic Filtration Technology

• The Pentair Arsenic Filter system ships ready to configure and requires periodic monitoring based on water usage and arsenic levels measured in your home.
• Cartridge or media replacement intervals depend on arsenic load and flow rate; regular testing of filtered water helps establish an appropriate maintenance schedule.
• Following a routine check every few months is typical to ensure the system maintains effective arsenic reduction.

Checklist: Recognizing Household Symptoms Related to Arsenic

• Arsenic typically has no taste, odor, or visible signs in water, so symptoms are not discernible by sensory detection.
• Staining, discoloration, or changes in water clarity usually indicate other water quality factors, not arsenic presence.
• Only laboratory testing can confirm arsenic content; relying on physical or taste clues is ineffective.

Checklist: Public-System Records vs. Private Well Testing

• Public-system water quality reports summarize averaged measurements and may not reflect conditions in private wells drawing from the same aquifer.
• Private wells can vary significantly from regional medians due to local geology and well depth.
• Testing your private well water is essential to know your household’s specific arsenic concentration and treatment needs.

Conclusion

To address the arsenic issue indicated by area aquifer sampling, homeowners who find existing equipment no longer controls arsenic may consider the Pentair Arsenic Filter. This system’s performance should be matched to your measured arsenic levels and household water use to ensure effective reduction and maintenance without guesswork.

Where this information comes from

Source: USGS groundwater sampling. Sampled 2010-07-14. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.

On record: U.S. Geological Survey sampling of Arsenic in the 110ALVM aquifer (Crawford County): 10 results from 10 wells, median 1.265 ug/L, range 0.38-6.8 ug/L; none above any federal threshold